Gizmo card

neta79·gizmo_card·hardware/project/gizmo_card.kicad_pcb

Gizmo card PCB layout, top view — open source ESP32 board by neta79

About the Gizmo card PCB

Gizmo card is an open source ESP32 PCB design by neta79, published on GitHub. It is a 4-layer board measuring 85.6 × 53.9 mm, with 136 components from 17 distinct parts.

Its main chip is the ESP32-C3FN4, from the ESP32 family. Other key parts include the PRTR5V0U2X and H7233-1. By type, the board carries 96 diodes, 17 resistors, 15 capacitors, 3 ICs, 2 inductors and 1 connector.

It belongs with the iot & wireless and displays & leds designs in this gallery.

From the project

A business card. With Wi-Fi and a matrix display. And Python.

- fully programmable; - with Wi-Fi and BLE support; - an USB port to plug it into a computer and do things with it; - and a catchy matrix display for good measure.

Main components on the Gizmo card

Gizmo card bill of materials (BOM)

136 components, 17 distinct parts.

QtyPartRefs
1
PRTR5V0U2X
U1
1
H7233-1
U2
1
ESP32-C3FN4
U3
1
XL-1005SURC
J1
1
PCB Antenna
AN1
1
40MHz
XTAL1
96
LED XL-1005SURC
D1, D2, D3, D4, D5, D6, D7, D8 +88
1
TBD
L1
1
2nH 500mA
L2
2
18pF
C1, C2
2
TBD
C3, C4
5
1uF
C5, C6, C7, C10, C13
3
100nF
C8, C9, C15
3
10nF
C11, C12, C14
2
22R
R1, R2
4
10K
R5, R8, R20, R21
11
150
R9, R10, R11, R12, R13, R14, R15, R16 +3

Gizmo card design files

The KiCad project lives in the neta79/gizmo_card repository on GitHub; these links point at the commit this page was built from.

Gizmo card: common questions

What microcontroller does the Gizmo card use?

The Gizmo card is built around the ESP32-C3FN4, from the ESP32 family.

How big is the Gizmo card PCB?

The Gizmo card measures 85.6 × 53.9 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Gizmo card?

136 components, from 17 distinct parts. The full bill of materials is listed on this page.

Where can I download the Gizmo card design files?

From the neta79/gizmo_card repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Gizmo card design in my own project?

The repository has no license, so all rights stay with neta79. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Gizmo card without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards