Ppg panel
nguyenhuy0426·PPG_simulator·hardware/ppg_panel/ppg_panel.kicad_pcb
About the Ppg panel PCB
Ppg panel is an open source PCB design by nguyenhuy0426, published on GitHub under the MIT license. It is a 2-layer board measuring 70 × 80 mm, with 70 components from 39 distinct parts.
It belongs with the audio and test & measurement designs in this gallery.
From the project
The PPG Signal Simulator is a portable device that generates synthetic PPG (photoplethysmography) waveforms with physiologically accurate morphology. It outputs the signal via a 12‑bit DAC for connection to patient monitors, oscilloscopes, or data acquisition systems.
Mở ppgpanel.kicadpro / ppgpanel.kicadpcb bằng KiCad 10. Đây là panel gia công gồm ba thiết kế khác nhau, mỗi thiết kế một bản:
Hai đường V-cut ở Y = 20 và 40 mm, chạy thẳng hết chiều ngang 70 mm. Tọa độ trong file KiCad: góc trên trái (50,50); các đường cắt Y=70 và 90. Không có khe phay giữa board: V-cut dùng chung đường biên, khoảng hở cơ khí trước khi bẻ bằng 0. Sau khi tách là ba PCB độc lập. Toàn bộ đồng, pad, via và vùng đồng cách tâm đường cắt ít nhất 1,5 mm mỗi phía; không có đường điện xuyên qua đường cắt. Các net và reference trong panel được đặt tiền tố OPT/BPW/TX để không nối nhầm…
Ppg panel bill of materials (BOM)
70 components, 39 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 22pF C0G | C0805_Hand | BPW_C1, BPW_C2 |
| 4 | 100nF X7R | C0805_Hand | BPW_C3, BPW_C4, BPW_C5, BPW_C6 |
| 4 | 1uF X7R 16V | C0805_Hand | BPW_C7, BPW_C8, OPT_C3, OPT_C4 |
| 1 | BPW34 RED | BPW34_THT | BPW_D1 |
| 1 | BPW34 IR | BPW34_THT | BPW_D2 |
| 2 | A2 / RED | Header_1x04_P2mm | BPW_J1, OPT_J1 |
| 2 | A0 / IR | Header_1x04_P2mm | BPW_J2, OPT_J2 |
| 1 | ADS1115: RED/GND/IR/GND | Header_1x04_P2.54mm | BPW_J3 |
| 2 | 1M 1% | R0805_Hand | BPW_R1, BPW_R2 |
| 4 | 1k 1% | R0805_Hand | BPW_R3, BPW_R4, OPT_R1, OPT_R2 |
| 2 | 100k 1% | R0805_Hand | BPW_R5, BPW_R6 |
| 2 | 10k 1% | R0805_Hand | BPW_R7, BPW_R8 |
| 2 | OPA333AIDBVR | SOT23_5_Hand | BPW_U1, BPW_U2 |
| 2 | 100nF 50V X7R ceramic | C0805_Hand | OPT_C1, OPT_C2 |
| 1 | ADS1115 outputs | Header_1x02_P2.54mm | OPT_J3 |
| 2 | OPT101P | DIP8_Socket | OPT_U1, OPT_U2 |
| 2 | DNP loop comp | C | TX_C2, TX_C4 |
| 1 | 100nF X7R 50V | C | TX_C5 |
| 1 | 10uF 16V | CP | TX_C7 |
| 4 | M3 / 3.2mm | Hole | TX_H1, TX_H2, TX_H3, TX_H4 |
Show 19 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP4725 IR 0x60 | Socket6 | TX_J1 |
| 1 | IR DAC OUT / GND | Header2 | TX_J2 |
| 1 | MCP4725 RED 0x61 | Socket6 | TX_J3 |
| 1 | RED DAC OUT / GND | Header2 | TX_J4 |
| 1 | IR LED A / K | Header2 | TX_J5 |
| 1 | RED LED A / K | Header2 | TX_J6 |
| 1 | 5V INPUT / GND | Header2 | TX_J7 |
| 1 | I2C IR: SCL SDA 3V3 GND | Header4 | TX_J8 |
| 1 | I2C RED: SCL SDA 3V3 GND | Header4 | TX_J9 |
| 1 | SCL IR 1-2 BYP / 2-3 100R | SJ3 | TX_JP1 |
| 1 | SDA IR 1-2 BYP / 2-3 100R | SJ3 | TX_JP2 |
| 1 | SCL RED 1-2 BYP / 2-3 100R | SJ3 | TX_JP3 |
| 1 | SDA RED 1-2 BYP / 2-3 100R | SJ3 | TX_JP4 |
| 2 | 2N4401 / E-B-C | NPN | TX_Q1, TX_Q2 |
| 4 | 10k 1% | R | TX_R1, TX_R2, TX_R6, TX_R7 |
| 2 | 1k | R | TX_R3, TX_R8 |
| 2 | 100R 1% 0.25W | RSense | TX_R4, TX_R9 |
| 4 | 100R 1% | R | TX_R11, TX_R12, TX_R13, TX_R14 |
| 1 | LM358P / DIP8 socket | DIP8 | TX_U1 |
Ppg panel design files
The KiCad project lives in the nguyenhuy0426/PPG_simulator repository on GitHub; these links point at the commit this page was built from.
Ppg panel: common questions
How big is the Ppg panel PCB?
The Ppg panel measures 70 × 80 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Ppg panel?
70 components, from 39 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Ppg panel design files?
From the nguyenhuy0426/PPG_simulator repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Ppg panel design in my own project?
Yes, under the terms of its MIT license, which nguyenhuy0426 chose for the repository.
More boards in PPG_simulator
Similar boards
StackLink
gusmanb
52.3 × 10.5 mm5 parts2LGPL-3.05.0kLevelShifter
gusmanb
28.3 × 39.8 mm21 parts2LGPL-3.05.0kAnalyzerBoxPCB fork
gusmanb
52.7 × 47.9 mm54 parts4LGPL-3.05.0kKLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kUSB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956