HardLabs

Proyecto V2(1)

NicolasSchkurko·Controlador_Termotanque_Solar_PF_ISJ·Proyecto Final/Circuitos PCB/Proyecto V2/Proyecto V2(1).kicad_pcb

Proyecto V2(1) PCB layout, top view — open source AVR/Arduino board by NicolasSchkurko

About the Proyecto V2(1) PCB

Proyecto V2(1) is an open source AVR/Arduino PCB design by NicolasSchkurko, published on GitHub. It is a 2-layer board measuring 80.5 × 85.7 mm, with 44 components from 24 distinct parts.

Its main chip is the ATmega328P-P, from the AVR/Arduino family. Other key parts include the LM7805. By type, the board carries 8 resistors, 4 switches, 4 capacitors, 3 transistors, 3 connectors and 3 diodes.

It belongs with the iot & wireless and power & battery designs in this gallery.

From the project

Proyecto Final de 6° año del Instituto San Jose A-355 elaborado por Bartolsic, Schkurko y Castillo Controlador de un termotanque solar con interfaz fisica y web (controlable via wifi) - año 2022

Main components on the Proyecto V2(1)

LM7805ATmega328P-P

Proyecto V2(1) bill of materials (BOM)

44 components, 24 distinct parts.

QtyPartRefs
1
LM7805
U1
1
ATmega328P-P
U3
3
PN2222A
Q1, Q2, Q3
1
16MHz
Y1
1
12v
J1
1
I2C + LCD
J2
1
DS1307
J3
1
Conn_01x03
DS18B20
2
Conn_01x04
ESP2866-2, ESP2866-arduino1
1
NodeMCU1.0(ESP-12E)
ESP8266
1
Conn_01x05
Encoder1
2
Conn_02x06_Odd_Even
Encoder/puls1, Encoder/puls-arduino1
1
lvl_sens
Lvl_sens1
2
Conn_01x05
RELAY1, RELAY2
3
RAYEX-L90
Relay-1, Relay-2, Relay-3
4
SW_Push
SW1, SW2, SW3, SW4
3
Conn_01x02
Salida-1, Salida-2, Salida-3
3
1N4007
D1, D2, D3
2
20pF
C1, C2
1
330nF
C3
Show 4 more
QtyPartRefs
1
100nF
C4
1
4.7k
R1
3
1k
R2, R3, R4
4
10k
R5, R6, R7, R8

Proyecto V2(1) design files

The KiCad project lives in the NicolasSchkurko/Controlador_Termotanque_Solar_PF_ISJ repository on GitHub; these links point at the commit this page was built from.

Proyecto V2(1): common questions

What microcontroller does the Proyecto V2(1) use?

The Proyecto V2(1) is built around the ATmega328P-P, from the AVR/Arduino family.

How big is the Proyecto V2(1) PCB?

The Proyecto V2(1) measures 80.5 × 85.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Proyecto V2(1)?

44 components, from 24 distinct parts. The full bill of materials is listed on this page.

Where can I download the Proyecto V2(1) design files?

From the NicolasSchkurko/Controlador_Termotanque_Solar_PF_ISJ repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Proyecto V2(1) design in my own project?

The repository has no license, so all rights stay with NicolasSchkurko. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Proyecto V2(1) without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in Controlador_Termotanque_Solar_PF_ISJ

Similar boards