HardLabs

Proyecto V2 backup lvlsens y tempsens

NicolasSchkurko·Controlador_Termotanque_Solar_PF_ISJ·Proyecto Final/Circuitos PCB/Proyecto V2/Proyecto V2 backup lvlsens y tempsens.kicad_pcb

Proyecto V2 backup lvlsens y tempsens PCB layout, top view — open source AVR/Arduino board by NicolasSchkurko

About the Proyecto V2 backup lvlsens y tempsens PCB

Proyecto V2 backup lvlsens y tempsens is an open source AVR/Arduino PCB design by NicolasSchkurko, published on GitHub. It is a 2-layer board measuring 89 × 85.7 mm, with 42 components from 22 distinct parts.

Its main chip is the ATmega328P-P, from the AVR/Arduino family. Other key parts include the LM7805. By type, the board carries 8 resistors, 4 switches, 4 capacitors, 3 transistors, 3 diodes and 2 ICs.

It belongs with the iot & wireless and power & battery designs in this gallery.

From the project

Proyecto Final de 6° año del Instituto San Jose A-355 elaborado por Bartolsic, Schkurko y Castillo Controlador de un termotanque solar con interfaz fisica y web (controlable via wifi) - año 2022

Main components on the Proyecto V2 backup lvlsens y tempsens

LM7805ATmega328P-P

Proyecto V2 backup lvlsens y tempsens bill of materials (BOM)

42 components, 22 distinct parts.

QtyPartRefs
1
LM7805
U1
1
ATmega328P-P
U3
3
PN2222A
Q1, Q2, Q3
1
16MHz
Y1
1
12v
J1
1
Conn_02x03_Odd_Even
DS18B20+LVL_SENS1
2
Conn_01x04
ESP2866-2, ESP2866-arduino1
1
NodeMCU1.0(ESP-12E)
ESP8266
1
Conn_01x05
Encoder1
2
Conn_02x06_Odd_Even
Encoder/puls1, Encoder/puls-arduino1
1
Conn_02x04_Odd_Even
RTC+LCD1
2
Conn_02x05_Odd_Even
Relay1, Relay2
3
RAYEX-L90
Relay-1, Relay-2, Relay-3
4
SW_Push
SW1, SW2, SW3, SW4
3
Conn_01x02
Salida-1, Salida-2, Salida-3
3
1N4007
D1, D2, D3
2
20pF
C1, C2
1
330nF
C3
1
100nF
C4
1
4.7k
R1
Show 2 more
QtyPartRefs
3
1k
R2, R3, R4
4
10k
R5, R6, R7, R8

Proyecto V2 backup lvlsens y tempsens design files

The KiCad project lives in the NicolasSchkurko/Controlador_Termotanque_Solar_PF_ISJ repository on GitHub; these links point at the commit this page was built from.

Proyecto V2 backup lvlsens y tempsens: common questions

What microcontroller does the Proyecto V2 backup lvlsens y tempsens use?

The Proyecto V2 backup lvlsens y tempsens is built around the ATmega328P-P, from the AVR/Arduino family.

How big is the Proyecto V2 backup lvlsens y tempsens PCB?

The Proyecto V2 backup lvlsens y tempsens measures 89 × 85.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Proyecto V2 backup lvlsens y tempsens?

42 components, from 22 distinct parts. The full bill of materials is listed on this page.

Where can I download the Proyecto V2 backup lvlsens y tempsens design files?

From the NicolasSchkurko/Controlador_Termotanque_Solar_PF_ISJ repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Proyecto V2 backup lvlsens y tempsens design in my own project?

The repository has no license, so all rights stay with NicolasSchkurko. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Proyecto V2 backup lvlsens y tempsens without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in Controlador_Termotanque_Solar_PF_ISJ

Similar boards