HardLabs

Placa main ESPtestsocket

NicolasSchkurko·Controlador_Termotanque_Solar_PF_ISJ·Proyecto Final/Circuitos PCB/Placas/Main y ESP test socket/Placa_main_ESPtestsocket.kicad_pcb

Placa main ESPtestsocket PCB layout, top view — open source AVR/Arduino board by NicolasSchkurko

About the Placa main ESPtestsocket PCB

Placa main ESPtestsocket is an open source AVR/Arduino PCB design by NicolasSchkurko, published on GitHub. It is a 2-layer board measuring 86.1 × 88.2 mm, with 17 components from 15 distinct parts.

Its main chip is the ATmega328P-P, from the AVR/Arduino family. Other key parts include the LM7805, LM1117-3.3 and BOB-12009. By type, the board carries 6 capacitors, 4 ICs, 3 connectors, 2 resistors and 1 crystal.

It belongs with the iot & wireless and power & battery designs in this gallery.

From the project

Proyecto Final de 6° año del Instituto San Jose A-355 elaborado por Bartolsic, Schkurko y Castillo Controlador de un termotanque solar con interfaz fisica y web (controlable via wifi) - año 2022

Main components on the Placa main ESPtestsocket

LM7805ATmega328P-PLM1117-3.3BOB-12009

Placa main ESPtestsocket bill of materials (BOM)

17 components, 15 distinct parts.

QtyPartRefs
1
LM7805
U1
1
ATmega328P-P
U3
1
LM1117-3.3
U4
1
BOB-12009
U5
1
16MHz
Y1
1
12v
J1
1
Conn_02x05_Odd_Even
J2
1
Conn_02x06_Odd_Even
J3
1
Conn_02x04_Odd_Even
RTC+LCD1
2
20pF
C1, C2
1
330nF
C3
2
100nF
C4, C5
1
10uF
C6
1
4.7k
R1
1
10k
R2

Placa main ESPtestsocket design files

The KiCad project lives in the NicolasSchkurko/Controlador_Termotanque_Solar_PF_ISJ repository on GitHub; these links point at the commit this page was built from.

Placa main ESPtestsocket: common questions

What microcontroller does the Placa main ESPtestsocket use?

The Placa main ESPtestsocket is built around the ATmega328P-P, from the AVR/Arduino family.

How big is the Placa main ESPtestsocket PCB?

The Placa main ESPtestsocket measures 86.1 × 88.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Placa main ESPtestsocket?

17 components, from 15 distinct parts. The full bill of materials is listed on this page.

Where can I download the Placa main ESPtestsocket design files?

From the NicolasSchkurko/Controlador_Termotanque_Solar_PF_ISJ repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Placa main ESPtestsocket design in my own project?

The repository has no license, so all rights stay with NicolasSchkurko. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Placa main ESPtestsocket without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in Controlador_Termotanque_Solar_PF_ISJ

Similar boards