HardLabs

Proyecto V2 backup ESP

NicolasSchkurko·Controlador_Termotanque_Solar_PF_ISJ·Proyecto Final/Circuitos PCB/Proyecto V2/Proyecto V2 backup ESP.kicad_pcb

Proyecto V2 backup ESP PCB layout, top view — open source ESP8266 board by NicolasSchkurko
Simulate this board

About the Proyecto V2 backup ESP PCB

Proyecto V2 backup ESP is an open source ESP8266 PCB design by NicolasSchkurko, published on GitHub. It is a 2-layer board measuring 88.2 × 84.9 mm, with 44 components from 25 distinct parts.

Its main chip is the ESP-12E, from the ESP8266 family. Other key parts include the LM7805 and ATmega328P-P. By type, the board carries 8 resistors, 4 switches, 4 capacitors, 3 ICs, 3 transistors and 3 diodes.

It belongs with the iot & wireless and power & battery designs in this gallery.

From the project

Proyecto Final de 6° año del Instituto San Jose A-355 elaborado por Bartolsic, Schkurko y Castillo Controlador de un termotanque solar con interfaz fisica y web (controlable via wifi) - año 2022

Main components on the Proyecto V2 backup ESP

LM7805ESP-12EATmega328P-P

Proyecto V2 backup ESP bill of materials (BOM)

44 components, 25 distinct parts.

QtyPartRefs
1
LM7805
U1
1
ESP-12E
U2
1
ATmega328P-P
U3
3
PN2222A
Q1, Q2, Q3
1
16MHz
Y1
1
12v
J1
2
Conn_02x05_Odd_Even
ESP2866-arduino1, JESP2866-2
1
NodeMCU1.0(ESP-12E)
ESP8266
1
Conn_01x05
Encoder1
1
Conn_02x06_Odd_Even
Encoder/puls2
1
Conn_02x06_Odd_Even
Encoder/puls-arduino1
2
Conn_01x03
LVL_SENS1, SENS_TEMP1
1
Conn_02x04_Odd_Even
RTC+LCD1
1
Conn_02x05_Odd_Even
Relay1
1
Conn_02x05_Odd_Even_1
Relay+DS18B20+LVL_SENS1
3
RAYEX-L90
Relay-1, Relay-2, Relay-3
4
SW_Push
SW1, SW2, SW3, SW4
3
Conn_01x02
Salida-1, Salida-2, Salida-3
3
1N4007
D1, D2, D3
2
20pF
C1, C2
Show 5 more
QtyPartRefs
1
330nF
C3
1
100nF
C4
1
4.7k
R1
3
4k7
R2, R3, R4
4
10k
R5, R6, R7, R8

Proyecto V2 backup ESP design files

The KiCad project lives in the NicolasSchkurko/Controlador_Termotanque_Solar_PF_ISJ repository on GitHub; these links point at the commit this page was built from.

Proyecto V2 backup ESP: common questions

What microcontroller does the Proyecto V2 backup ESP use?

The Proyecto V2 backup ESP is built around the ESP-12E, from the ESP8266 family.

How big is the Proyecto V2 backup ESP PCB?

The Proyecto V2 backup ESP measures 88.2 × 84.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Proyecto V2 backup ESP?

44 components, from 25 distinct parts. The full bill of materials is listed on this page.

Where can I download the Proyecto V2 backup ESP design files?

From the NicolasSchkurko/Controlador_Termotanque_Solar_PF_ISJ repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Proyecto V2 backup ESP design in my own project?

The repository has no license, so all rights stay with NicolasSchkurko. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Proyecto V2 backup ESP without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.

More boards in Controlador_Termotanque_Solar_PF_ISJ

Similar boards