8088homebrew
nikitaG2011·8088homebrew·schematic/RaArPr/motherborard/motherborard.kicad_pcb
About the 8088homebrew PCB
8088homebrew is an open source PCB design by nikitaG2011, published on GitHub. It is a 4-layer board measuring 116 × 111 mm, with 16 components from 13 distinct parts.
Other key parts include the 8088_Min_Mode, 74LS373, 8284, 74LS138 and 74LS08. By type, the board carries 9 ICs, 2 capacitors, 2 resistors, 1 crystal, 1 connector and 1 switch.
From the project
8088 homebrew computer
just run the make comand to assemble the code
Main components on the 8088homebrew
8088homebrew bill of materials (BOM)
16 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 8088_Min_Mode | DIP-40_W15.24mm | U1 |
| 2 | 74LS373 | DIP-20_W7.62mm_Socket_LongPads | U2, U6 |
| 1 | 8284 | DIP-18_W7.62mm_Socket_LongPads | U3 |
| 1 | 74LS138 | DIP-16_W7.62mm_Socket_LongPads | U4 |
| 1 | 74LS08 | DIP-14_W7.62mm_Socket_LongPads | U5 |
| 1 | 74LS00 | DIP-14_W7.62mm_Socket_LongPads | U7 |
| 1 | AS6C4008-55PCN | DIP-32_W15.24mm_Socket_LongPads | U8 |
| 1 | 28C256 | DIP-28_W15.24mm_LongPads | U9 |
| 1 | Crystal | Crystal_HC18-U_Horizontal | Y1 |
| 1 | Conn_02x40_Odd_Even | PinHeader_2x40_P2.54mm_Horizontal | J1 |
| 1 | SW_MEC_5E | SW_MEC_5GSH9 | SW1 |
| 2 | C | C_Axial_L3.8mm_D2.6mm_P7.50mm_Horizontal | C1, C2 |
| 2 | 1Kohm | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2 |
8088homebrew design files
The KiCad project lives in the nikitaG2011/8088homebrew repository on GitHub; these links point at the commit this page was built from.
8088homebrew: common questions
How big is the 8088homebrew PCB?
The 8088homebrew measures 116 × 111 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the 8088homebrew?
16 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the 8088homebrew design files?
From the nikitaG2011/8088homebrew repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the 8088homebrew design in my own project?
The repository has no license, so all rights stay with nikitaG2011. Use it as a reference, and ask the author before reusing the design.