6 open source boards using the 8088_Min_Mode
Real designs built with the 8088_Min_Mode, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
MCL86jr
MicroCoreLabs
56.1 × 57.1 mm66 parts4LNo license532Civil25
raleighslack
137.2 × 137.2 mm40 parts2LApache-2.068088-mainboard
i-melnichenko
170 × 125 mm41 parts2LMIT5Intel 8088 Computer
oberrow
100 × 100 mm64 parts4LMIT18088homebrew
nikitaG2011
116 × 111 mm16 parts4LNo license1- schematic only · 69 parts
Yaufp8088
fifteenhex
69 partsGPL-3.01
How designs wire the 8088_Min_Mode
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the 8088_Min_Mode connects to, and the resistors, capacitors and other passives placed on it.
- The HLDA pin is left unconnected on 4 of 5 designs.
- The HOLD pin is tied to GND on 4 of 5 designs.
- The MN/MX pin is tied to 5V on 4 of 5 designs.
- The SSO pin is left unconnected on 4 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1, 20 | Connected to: GND 100% | — |
| NMIpin 17 | Connected to: GND 60% · a signal 40% | — |
| TESTpin 23 | Connected to: GND 60% · not connected 20% · VCC 20% | — |
| HLDApin 30 | Connected to: Not connected 80% · a signal 20% | — |
| HOLDpin 31 | Connected to: GND 80% · a signal 20% | — |
| MN/MXpin 33 | Connected to: 5V 80% · not connected 20% | — |
| SSOpin 34 | Connected to: Not connected 80% · a signal 20% | — |
| VCCpin 40 | Connected to: 5V 100% |
|
31 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include MCL86jr by MicroCoreLabs, Civil25 by raleighslack, 8088-mainboard by i-melnichenko and 8088homebrew by nikitaG2011.
The 8088_Min_Mode in open source designs
The gallery holds 6 open source boards using the 8088_Min_Mode from 6 GitHub repositories; a typical one measures about 116 × 111 mm and carries around 53 components.
60% use four copper layers or more, and 67% carry an open source license.
The most starred is MCL86jr by MicroCoreLabs.
Parts used alongside the 8088_Min_Mode
What boards using the 8088_Min_Mode are built for
8088_Min_Mode: common questions
Where can I find a 8088_Min_Mode reference design?
Each of the 6 boards on this page is a real design using the 8088_Min_Mode. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 8088_Min_Mode HLDA pin connected?
The HLDA pin is left unconnected on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the 8088_Min_Mode.
How is the 8088_Min_Mode HOLD pin connected?
The HOLD pin is tied to GND on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the 8088_Min_Mode.
How is the 8088_Min_Mode MN/MX pin connected?
The MN/MX pin is tied to 5V on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the 8088_Min_Mode.
What parts are used alongside the 8088_Min_Mode?
The 8284, 74LS138, 28C256, 74HC245 and 74LS373 appear in the most repositories here.
How big is a typical board using the 8088_Min_Mode?
The median is 116 × 111 mm, and 40% are two-layer designs.
What is the most popular open source board using the 8088_Min_Mode?
By GitHub stars, MCL86jr by MicroCoreLabs, with 532 stars.
Can I simulate one of these boards using the 8088_Min_Mode before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.