GarageDoor pro
nikolaus018·garageDoor-pro·hardware/garageDoor-pro.kicad_pcb
About the GarageDoor pro PCB
GarageDoor pro is an open source ESP32 PCB design by nikolaus018, published on GitHub. It is a 4-layer board measuring 60 × 31 mm, with 34 components from 25 distinct parts.
Its main chip is the ESP32-C3-MINI-1-H4X, from the ESP32 family. Other key parts include the MAX-M10S-00B, AP2112K-3.3TRG1 and USBLC6-2SC6. By type, the board carries 11 resistors, 9 capacitors, 4 ICs, 3 connectors, 3 diodes and 1 transistor.
It belongs with the rf & radio and iot & wireless designs in this gallery.
From the project
ESP32-C3 + GPS board that opens the garage door when you leave and arrive
Opens the garage door when you leave home and when you arrive: an ESP32-C3, a GPS and a transistor that presses the button of a spare remote, powered over USB-C from the car. Home is set from a small Wi-Fi web panel.
What gets built now: the perfboard prototype from ready-made modules, see prototype/README.md (parts list, layout, assembly, test). The custom PCB below is the later, integrated version; the firmware runs on both.

Main components on the GarageDoor pro
GarageDoor pro bill of materials (BOM)
34 components, 25 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C3-MINI-1-H4X | ESP32-C3-MINI-1 | U1 |
| 1 | MAX-M10S-00B MAX-M10S | ublox_MAX | U2 |
| 1 | AP2112K-3.3TRG1 AP2112K-3.3 | SOT-23-5 | U3 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U4 |
| 1 | SS8050 | SOT-23 | Q1 |
| 1 | TYPE-C-31-M-12 USB-C | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | U.FL-R-SMT-1(10) U.FL GNSS antenna | U.FL_Hirose_U.FL-R-SMT-1_Vertical | J2 |
| 1 | KF128-5.08-2P Remote button | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J3 |
| 1 | SMD1206-050C-6V 500mA | Fuse_1206_3216Metric | F1 |
| 1 | TS-1187A-B-A-B SETUP | SW_Push_1P1T_XKB_TS-1187A | SW1 |
| 1 | SMF5.0A | D_SOD-123F | D1 |
| 1 | KT-0603R RED | LED_0603_1608Metric | D2 |
| 1 | KT-0603G GREEN | LED_0603_1608Metric | D3 |
| 1 | LQG15HS27NJ02D 27nH | L_0402_1005Metric | L1 |
| 1 | CL05B103KB5NNNC 10nF | C_0402_1005Metric | C1 |
| 1 | 0402CG470J500NT 47pF C0G | C_0402_1005Metric | C2 |
| 4 | CL10A106KP8NNNC 10uF | C_0603_1608Metric | C3, C4, C5, C7 |
| 2 | CC0402KRX7R7BB104 100nF | C_0402_1005Metric | C6, C8 |
| 1 | CL05A105KP5NNNC 1uF | C_0402_1005Metric | C9 |
| 1 | 1206W4F100JT5E 10R | R_1206_3216Metric | R1 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 0402WGF1002TCE 10k | R_0402_1005Metric | R2, R3, R4, R5 |
| 2 | 0402WGF5101TCE 5.1k | R_0402_1005Metric | R6, R7 |
| 1 | 0402WGF3300TCE 330R | R_0402_1005Metric | R8 |
| 1 | 0402WGF1003TCE 100k | R_0402_1005Metric | R9 |
| 2 | 0603WAF1001T5E 1k | R_0603_1608Metric | R10, R11 |
GarageDoor pro design files
The KiCad project lives in the nikolaus018/garageDoor-pro repository on GitHub; these links point at the commit this page was built from.
GarageDoor pro: common questions
What microcontroller does the GarageDoor pro use?
The GarageDoor pro is built around the ESP32-C3-MINI-1-H4X, from the ESP32 family.
How big is the GarageDoor pro PCB?
The GarageDoor pro measures 60 × 31 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the GarageDoor pro?
34 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the GarageDoor pro design files?
From the nikolaus018/garageDoor-pro repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the GarageDoor pro design in my own project?
The repository has no license, so all rights stay with nikolaus018. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the GarageDoor pro without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k