30 open source boards using the MAX-M10S-00B
Real designs built with the MAX-M10S-00B, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Dronemagnav
ajisrawi
64 × 60 mm56 parts4LCustom license11STM32
TeleSTERN
shorlee
90 × 45 mm293 parts6LGPL-3.03ESP32
Kompic Mk1b
porupski
44.5 × 50.6 mm121 parts4LGPL-3.03RP2040/RP2350
StratosCore
pantojinho
60 × 84 mm245 parts4LNo license1STM32
IRIS
codinga593
80 × 80 mm129 parts6LNo license1STM32
Forte
codinga593
50 × 60 mm60 parts4LNo license1ESP32
GarageDoor pro
nikolaus018
60 × 31 mm34 parts4LNo license1STM32
Dual Axis Controller
jrseti
140 × 100 mm307 parts4LCC0-1.00STM32
Mdx1
pingpongshow
135 × 92 mm306 parts4LCC-BY-NC-4.00STM32
RCM DishControllerBoard
jrseti
140 × 100 mm304 parts4LMIT0ESP32
Kicad foxhunt batterytest
gx1400
191.5 × 121.8 mm253 parts4LNo license0ESP32
Vancontroller
Camperlux
230 × 135 mm247 parts4LCustom license0ESP32
MainBoard
meawoppl
139.7 × 63.5 mm245 parts2LNo license0STM32
Jrdish axis controller
jrseti
100 × 100 mm243 parts4LMIT0ESP32
DroneMagNav2.0
ajisrawi
128 × 84 mm218 parts4LCustom license0Airgrep
mp911de
105 × 95 mm175 parts4LNo license0RP2040/RP2350
ARC PFC
RTU-HPR
50 × 88.5 mm138 parts4LNo license0STM32
Wrectangle-V4
Wildcat-Rocket-Engineering-Club
100 × 140 mm137 parts2LNo license0ESP32
Totem compass
ljagiello
45.8 × 46.4 mm137 parts4LApache-2.00STM32
UYDUTEPE
emirhanuluakan
85 × 56 mm93 parts6LCERN-OHL-W-2.00ESP32
Tar team1-hardware
pranavs41
36 × 39 mm83 parts4LNo license0ESP32
OpenCycle
Vishvak365
46 × 86.4 mm67 parts4LNo license0ESP32
Dronemagnav
Comrade-rn
64 × 60 mm56 parts4LCustom license0Nordic nRF
Pmd tracker
ollielarkins
45 × 30 mm30 parts4LNo license0Pcb agent workflow
John-owo
25 × 36.5 mm19 parts4LMIT0Kestrel gps
HeyPCB
28 × 28 mm13 parts4LCERN-OHL-S-2.00ESP32
Kompic Mk1
porupski
44.5 × 50.6 mm119 parts4LGPL-3.03STM32
Wrectangle-V4-old
Wildcat-Rocket-Engineering-Club
60 × 100 mm135 parts2LNo license0STM32
GPSDO
AntonSievering
100 × 100 mm179 parts4LNo license0STM32
Board1
Wildcat-Rocket-Engineering-Club
63.5 × 63.5 mm6 parts2LNo license0
How designs wire the MAX-M10S-00B
Read from the KiCad layouts of 27 open source designs, one per repository: what each pin of the MAX-M10S-00B connects to, and the resistors, capacitors and other passives placed on it.
- The LNA_EN_13 pin is left unconnected on 23 of 26 designs (a signal on 3).
- The V_IO_7 pin has a decoupling capacitor on 19 of 26 designs, most often 100 nF (then 10 µF).
- The VCC_8 pin has a decoupling capacitor on 19 of 26 designs, most often 100 nF (then 10 µF).
- The EXTINT_5 pin is left unconnected on 22 of 26 designs (a signal on 3).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GND_1pin 1 | Connected to: GND 96% | — |
| EXTINT_5pin 5 | Connected to: Not connected 85% | — |
| V_BCKP_6pin 6 | Connected to: 3.3V 38% · not connected 31% · a signal 31% |
|
| V_IO_7pin 7 | Connected to: 3.3V 88% |
|
| VCC_8pin 8 | Connected to: 3.3V 88% |
|
| GND_10pin 10 | Connected to: GND 96% | — |
| GND_12pin 12 | Connected to: GND 96% | — |
| LNA_EN_13pin 13 | Connected to: Not connected 88% | — |
| VIO_SEL_15pin 15 | Connected to: Not connected 85% | — |
| SDA_16pin 16 | Connected to: Not connected 77% · a signal 23% | — |
| SCL_17pin 17 | Connected to: Not connected 77% · a signal 23% | — |
| SAFEBOOT_18pin 18 | Connected to: Not connected 77% · a signal 23% | — |
6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Dronemagnav by ajisrawi, Kompic Mk1 by porupski, TeleSTERN by shorlee and Forte by codinga593.
The MAX-M10S-00B in open source designs
The gallery holds 30 open source boards using the MAX-M10S-00B from 27 GitHub repositories; a typical one measures about 64 × 71.8 mm and carries around 136 components.
87% use four copper layers or more, and 33% carry an open source license.
The most starred is Dronemagnav by ajisrawi.
Parts used alongside the MAX-M10S-00B
Microcontrollers on boards using the MAX-M10S-00B
What boards using the MAX-M10S-00B are built for
MAX-M10S-00B: common questions
Where can I find a MAX-M10S-00B reference design?
Each of the 30 boards on this page is a real design using the MAX-M10S-00B. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the MAX-M10S-00B LNA_EN_13 pin connected?
The LNA_EN_13 pin is left unconnected on 23 of 26 designs (a signal on 3). Counted from the KiCad layouts of 27 open source designs using the MAX-M10S-00B.
What decoupling capacitors do designs use on the MAX-M10S-00B V_IO_7 pin?
The V_IO_7 pin has a decoupling capacitor on 19 of 26 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 27 open source designs using the MAX-M10S-00B.
What decoupling capacitors do designs use on the MAX-M10S-00B VCC_8 pin?
The VCC_8 pin has a decoupling capacitor on 19 of 26 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 27 open source designs using the MAX-M10S-00B.
What parts are used alongside the MAX-M10S-00B?
The USBLC6-2SC6, AP2112K-3.3TRG1, AMS1117-3.3, ESP32-S3-WROOM-1-N16R8 and BMI088 appear in the most repositories here.
Which microcontrollers do boards using the MAX-M10S-00B use?
Most are built on ESP32 (12), STM32 (12), RP2040/RP2350 (2) and Nordic nRF (1).
How big is a typical board using the MAX-M10S-00B?
The median is 64 × 71.8 mm, and 13% are two-layer designs.
What is the most popular open source board using the MAX-M10S-00B?
By GitHub stars, Dronemagnav by ajisrawi, with 11 stars.
Can I simulate one of these boards using the MAX-M10S-00B before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.