13 open source boards using the ESP32-C3-MINI-1-H4X
Real designs built with the ESP32-C3-MINI-1-H4X, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Quad unibody
ajwock
63.5 × 55.9 mm67 parts2LNo license14ESP32
GarageDoor pro
nikolaus018
60 × 31 mm34 parts4LNo license1ESP32
Emb drone flight stack
CGainsWorks
497.4 × 154.7 mm1182 parts6LNo license0ESP32
OpenSourceDrone
CGainsWorks
497.4 × 154.7 mm1182 parts6LNo license0ESP32
SAVITAR-V2
alexandru-mot
54.9 × 46.3 mm135 parts4LNo license0ESP32
Ssr4
Bunty9
90 × 75 mm67 parts2LCERN-OHL-S-2.00ESP32
OpenRower
naibaf7
55 × 45 mm65 parts2LMIT0ESP32
Pot pulse
rwrife
70 × 50 mm41 parts4LMIT0ESP32
SerialTap
tfindlay-au
54 × 22 mm33 parts4LCERN-OHL-P-2.00ESP32
MiniBot
DDeGonge
21.2 × 28 mm58 parts4LMIT40ESP32
Quad unibody placement0
ajwock
50.8 × 45.7 mm64 parts2LNo license14ESP32
Home copter
ajwock
41.9 × 38.7 mm63 parts2LNo license14ESP32
Home copter 2
ajwock
41.9 × 38.7 mm63 parts2LNo license14
How designs wire the ESP32-C3-MINI-1-H4X
Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the ESP32-C3-MINI-1-H4X connects to, and the resistors, capacitors and other passives placed on it.
- The EN pin has a capacitor to GND on 9 of 10 designs, most often 1 µF (then 100 nF).
- The NC_1 pin is left unconnected on 10 of 10 designs.
- The NC_3 pin is left unconnected on 10 of 10 designs.
- The NC_4 pin is left unconnected on 10 of 10 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GND_1pin 1 | Connected to: GND 90% | — |
| GND_2pin 2 | Connected to: GND 90% | — |
| 3V3pin 3 | Connected to: 3.3V 80% | — |
| NC_1pin 4 | Connected to: Not connected 100% | — |
| IO2pin 5 | Connected to: SX1280IMLTRT 20%, a connector 20% · not connected 30% |
|
| NC_2pin 7 | Connected to: Not connected 90% | — |
| ENpin 8 | Connected to: Signal 90% |
|
| NC_3pin 9 | Connected to: Not connected 100% | — |
| NC_4pin 10 | Connected to: Not connected 100% | — |
| GND_3pin 11 | Connected to: GND 90% | — |
| GND_4pin 14 | Connected to: GND 90% | — |
| NC_5pin 15 | Connected to: Not connected 100% | — |
| IO10pin 16 | Connected to: A connector 20% · not connected 30% |
|
| NC_6pin 17 | Connected to: Not connected 100% | — |
| IO7pin 21 | Connected to: SX1280IMLTRT 20%, a connector 20% · not connected 30% |
|
| IO8pin 22 | Connected to: A connector 20% · not connected 20% |
|
| IO9pin 23 | Connected to: A connector 30% |
|
| NC_7pin 24 | Connected to: Not connected 100% | — |
| NC_8pin 25 | Connected to: Not connected 100% | — |
| NC_9pin 28 | Connected to: Not connected 90% | — |
| NC_10pin 29 | Connected to: Not connected 90% | — |
| NC_11pin 32 | Connected to: Not connected 100% | — |
| NC_12pin 33 | Connected to: Not connected 90% | — |
| NC_13pin 34 | Connected to: Not connected 90% | — |
| NC_14pin 35 | Connected to: Not connected 90% | — |
| GND_5pin 36 | Connected to: GND 90% | — |
| GND_6pin 37 | Connected to: GND 90% | — |
| GND_7pin 38 | Connected to: GND 90% | — |
| GND_8pin 39 | Connected to: GND 90% | — |
| GND_9pin 40 | Connected to: GND 90% | — |
| GND_10pin 41 | Connected to: GND 90% | — |
| GND_11pin 42 | Connected to: GND 90% | — |
| GND_12pin 43 | Connected to: GND 90% | — |
| GND_13pin 44 | Connected to: GND 90% | — |
| GND_14pin 45 | Connected to: GND 90% | — |
| GND_15pin 46 | Connected to: GND 90% | — |
| GND_16pin 47 | Connected to: GND 100% | — |
| GND_17pin 48 | Connected to: GND 90% | — |
| GND_18pin 49 | Connected to: GND 90% | — |
| GND_19pin 50 | Connected to: GND 90% | — |
21 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include MiniBot by DDeGonge, Home copter by ajwock, GarageDoor pro by nikolaus018 and SAVITAR-V2-PCB by alexandru-mot.
The ESP32-C3-MINI-1-H4X in open source designs
The gallery holds 13 open source boards using the ESP32-C3-MINI-1-H4X from 10 GitHub repositories; a typical one measures about 55 × 45.7 mm and carries around 64 components.
54% use four copper layers or more, and 38% carry an open source license.
The most starred is MiniBot by DDeGonge.
Parts used alongside the ESP32-C3-MINI-1-H4X
Microcontrollers on boards using the ESP32-C3-MINI-1-H4X
What boards using the ESP32-C3-MINI-1-H4X are built for
ESP32-C3-MINI-1-H4X: common questions
Where can I find a ESP32-C3-MINI-1-H4X reference design?
Each of the 13 boards on this page is a real design using the ESP32-C3-MINI-1-H4X. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the ESP32-C3-MINI-1-H4X EN pin connected?
The EN pin has a capacitor to GND on 9 of 10 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 10 open source designs using the ESP32-C3-MINI-1-H4X.
How is the ESP32-C3-MINI-1-H4X NC_1 pin connected?
The NC_1 pin is left unconnected on 10 of 10 designs. Counted from the KiCad layouts of 10 open source designs using the ESP32-C3-MINI-1-H4X.
How is the ESP32-C3-MINI-1-H4X NC_3 pin connected?
The NC_3 pin is left unconnected on 10 of 10 designs. Counted from the KiCad layouts of 10 open source designs using the ESP32-C3-MINI-1-H4X.
What parts are used alongside the ESP32-C3-MINI-1-H4X?
The USBLC6-2SC6, ADPL40502AUJZ-1.2-R7, AP2112K-3.3TRG1, AT7456E and ATMEGA4809-AF appear in the most repositories here.
Which microcontrollers do boards using the ESP32-C3-MINI-1-H4X use?
Most are built on ESP32 (13).
How big is a typical board using the ESP32-C3-MINI-1-H4X?
The median is 55 × 45.7 mm, and 46% are two-layer designs.
What is the most popular open source board using the ESP32-C3-MINI-1-H4X?
By GitHub stars, MiniBot by DDeGonge, with 40 stars.
Can I simulate one of these boards using the ESP32-C3-MINI-1-H4X before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.