AutoCADLearning
notahuman404·AutoCADLearning·starbie/starbie.kicad_pcb
About the AutoCADLearning PCB
AutoCADLearning is an open source ESP32 PCB design by notahuman404, published on GitHub. It is a 2-layer board measuring 103.7 × 88.1 mm, with 7 components from 6 distinct parts.
Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. Other key parts include the DHT11. By type, the board carries 2 ICs, 2 connectors, 2 switches and 1 resistor.
It belongs with the sensors and displays & leds designs in this gallery.
From the project
Starbie is a small motion-controlled digital pet built around a Seeed Studio XIAO ESP32-C3. It draws a one-bit pet on a 128×64 OLED, uses an MPU6050 to read tilt and shaking, and offers a four-way action menu. A DHT11 can provide temperature and humidity readings.
Starbie is a small motion-controlled digital pet built around a Seeed Studio XIAO ESP32-C3. It draws a one-bit pet on a 128×64 OLED, uses an MPU6050 to read tilt and shaking, and offers a four-way action menu. A DHT11 can provide temperature and humidity readings.
- Animated pet with nap, play, feed, and pet actions. - Tilt-controlled radial menu, using the MPU6050 as a simple air mouse. - Shake reaction that wakes Starbie and changes its stats. - Stats screen for joy, energy, fullness, and available sensor readings. - Joy, energy, and fullness are saved using the ESP32 Preferences storage…

Main components on the AutoCADLearning
AutoCADLearning bill of materials (BOM)
7 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DHT11 | Aosong_DHT11_5.5x12.0_P2.54mm | U1 |
| 1 | XIAO-ESP32-C3-SMD | XIAO-ESP32-C6-DIP | U2 |
| 1 | CONN_01X04_PIN Conn_01x04_Pin | Display_128x64_096_I2C | J1 |
| 1 | CONN_01X08_PIN Conn_01x08_Pin | PinHeader_1x08_P2.54mm_Vertical | J2 |
| 2 | SW_Push | SW_Cherry_MX_1.00u_PCB | SW1, SW2 |
| 1 | 10K 10k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
AutoCADLearning design files
The KiCad project lives in the notahuman404/AutoCADLearning repository on GitHub; these links point at the commit this page was built from.
- Layoutstarbie/starbie.kicad_pcb
- Schematicstarbie/starbie.kicad_sch
- BOMBom.csv
AutoCADLearning: common questions
What microcontroller does the AutoCADLearning use?
The AutoCADLearning is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.
How big is the AutoCADLearning PCB?
The AutoCADLearning measures 103.7 × 88.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the AutoCADLearning?
7 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the AutoCADLearning design files?
From the notahuman404/AutoCADLearning repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the AutoCADLearning design in my own project?
The repository has no license, so all rights stay with notahuman404. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the AutoCADLearning without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k