ESP32Musicplayer

NZX37·ESP32Musicplayer·PCB/MiniMusicPlayer.kicad_pcb

ESP32Musicplayer PCB layout, top view — open source board by NZX37

About the ESP32Musicplayer PCB

ESP32Musicplayer is an open source PCB design by NZX37, published on GitHub. It is a 2-layer board measuring 81.3 × 69.8 mm, with 28 components from 19 distinct parts.

Other key parts include the TP4056-42-ESOP8 and TPA6132A2RTE. By type, the board carries 8 connectors, 8 resistors, 6 capacitors, 3 diodes, 2 ICs and 1 switch.

It belongs with the audio, power & battery and iot & wireless designs in this gallery.

From the project

A rechargeable music player built around an ESP32-S3. The design is intended to play music stored on a microSD card and send stereo audio to standard headphones through a 3.5 mm jack. I made it to learn how the digital, audio, charging, PCB, and enclosure parts of a small portabl

A rechargeable music player built around an ESP32-S3. The design is intended to play music stored on a microSD card and send stereo audio to standard headphones through a 3.5 mm jack. I made it to learn how the digital, audio, charging, PCB, and enclosure parts of a small portable device fit together.

The ESP32-S3 is the central controller. It reads music data from the microSD socket and sends digital audio over I²S to a PCM5102 digital-to-analog converter. The analog stereo signal then passes through a TPA6132A2 headphone amplifier and out through the 3.5 mm headphone jack. A ST7789 TFT is…

ESP32Musicplayer, from the project README
From the project README

Main components on the ESP32Musicplayer

ESP32Musicplayer bill of materials (BOM)

28 components, 19 distinct parts.

QtyPartRefs
1
TP4056-42-ESOP8
U2
1
TPA6132A2RTE
U3
1
Boost Converter
J1
1
BOOT
J2
1
Micro_SD_Card_Det1
J3
1
RESET
J4
1
TFT
J5
1
Battery
J7
1
Conn_01x08_Pin
J8
1
AudioJack3_SwitchTR
J10
1
RotaryEncoder_Switch
SW3
2
LED
D1, D2
1
1N5819
D3
4
1uF
C1, C4, C5, C6
2
2u2F
C2, C3
1
1k2R
R1
2
100kR
R2, R3
3
10kR
R4, R5, R6
2
470R
R7, R8

ESP32Musicplayer design files

The KiCad project lives in the NZX37/ESP32Musicplayer repository on GitHub; these links point at the commit this page was built from.

ESP32Musicplayer: common questions

How big is the ESP32Musicplayer PCB?

The ESP32Musicplayer measures 81.3 × 69.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ESP32Musicplayer?

28 components, from 19 distinct parts. The full bill of materials is listed on this page.

Where can I download the ESP32Musicplayer design files?

From the NZX37/ESP32Musicplayer repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the ESP32Musicplayer design in my own project?

The repository has no license, so all rights stay with NZX37. Use it as a reference, and ask the author before reusing the design.

Similar boards