Eth uart breakout
About the Eth uart breakout
Eth uart breakout is an open source PCB design by OJ2016, published on GitHub. It is a 2-layer board measuring 60 × 39.3 mm, with 14 components from 13 distinct parts.
By type, the board carries 8 jumpers, 5 connectors and 1 IC.
It belongs with the dev boards & breakouts designs in this gallery.
Eth uart breakout bill of materials (BOM)
14 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ | WAVESHARE-2CH-UART-TO-ETH | U1 |
| 2 | Conn_01x04_Pin | JST_ZH_B4B-ZR_1x04_P1.50mm_Vertical | J1, J2 |
| 1 | 5V IN | TerminalBlock_bornier-2_P5.08mm | J3 |
| 1 | CH1 PWR | TerminalBlock_bornier-2_P5.08mm | J4 |
| 1 | CH2 PWR | TerminalBlock_bornier-2_P5.08mm | J5 |
| 1 | TX-TX1 | SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP1 |
| 1 | RX-RX1 | SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP2 |
| 1 | TX-TX2 | SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP3 |
| 1 | RX-RX2 | SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP4 |
| 1 | RX-TX1 | SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP5 |
| 1 | TX-RX1 | SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP6 |
| 1 | TX-RX2 | SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP7 |
| 1 | RX-TX2 | SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP8 |
Eth uart breakout design files
The KiCad project lives in the OJ2016/pcb-common repository on GitHub; these links point at the commit this page was built from.
Eth uart breakout: common questions
How big is the Eth uart breakout?
The Eth uart breakout measures 60 × 39.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Eth uart breakout?
14 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Eth uart breakout design files?
From the OJ2016/pcb-common repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Eth uart breakout design in my own project?
The repository has no license, so all rights stay with OJ2016. Use it as a reference, and ask the author before reusing the design.
More boards in pcb-common
Jantteri right
63.8 × 63.8 mm89 parts2LNo license1
STM32Jantteri motor pwr
137.7 × 45 mm72 parts2LNo license1
Jantteri secondary
90.6 × 20.3 mm58 parts2LNo license1
STM32Jantteri left
63.8 × 63.8 mm55 parts2LNo license1
Jantteri testrack interface
130.2 × 51.8 mm53 parts2LNo license1
STM32Jantteri motor pwr old
40 × 80.7 mm52 parts2LNo license1
ESP32Jantteri main
78.5 × 34.3 mm44 parts2LNo license1
STM32Jantteri hit detector
80 × 15.1 mm30 parts2LNo license1
STM32Jantteri lora
40.2 × 17.5 mm24 parts2LNo license1
Similar boards
Radioberry juice
pa3gsb
65 × 56 mm87 parts2LNo license675
Radioberry preamp
65 × 56 mm137 parts2LNo license675
Hat
65 × 56 mm81 parts2LNo license675
Sram dev board
Wren6991
50 × 50 mm12 parts2LNo license508
ESP32
Chrismettal
66.4 × 48.1 mm20 parts2LCC-BY-SA-4.0446
ESP32
66.4 × 48.1 mm20 parts2LCC-BY-SA-4.0446