Jantteri motor pwr
About the Jantteri motor pwr PCB
Jantteri motor pwr is an open source STM32 PCB design by OJ2016, published on GitHub. It is a 2-layer board measuring 137.7 × 45 mm, with 72 components from 61 distinct parts.
Its main chip is the BQ24610, from the STM32 family. Other key parts include the STUSB4500QTR, DRV8848, AMS1117-3.3, CP2102N-A01-GQFN28 and HT75XX-1-SOT89. By type, the board carries 23 capacitors, 20 resistors, 10 ICs, 8 connectors, 5 diodes and 2 switches.
Main components on the Jantteri motor pwr
Jantteri motor pwr bill of materials (BOM)
72 components, 61 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STUSB4500QTR INA181 | SOT-23-6 | U1 |
| 1 | DRV8848 LMV321 | SOT-23-5 | U2 |
| 1 | BQ24610 STM32L151C8TxA | LQFP-48_7x7mm_P0.5mm | U3 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U4 |
| 1 | CP2102N-A01-GQFN28 FUSB302BMPX | WQFN-14-1EP_2.5x2.5mm_P0.5mm_EP1.45x1.45mm | U5 |
| 1 | HT75XX-1-SOT89 LM2596S-5 | TO-263-5_TabPin3 | U6 |
| 1 | HT75XX-1-SOT89 DRV8848 | TSSOP-16-1EP_4.4x5mm_P0.65mm | U7 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U8 |
| 2 | LM317_SOT-223 | SOT-223-3_TabPin2 | U9, U10 |
| 1 | AP3407 AO3400A | SOT-23 | Q1 |
| 1 | 16MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | USB_C_RECEPTACLE_USB2.0 LED | JST_ZH_B3B-ZR_1x03_P1.50mm_Vertical | J1 |
| 2 | CONN_01X02_MALE DBG | JST_ZH_B4B-ZR_1x04_P1.50mm_Vertical | J2, J3 |
| 1 | CONN_02X08_ODD_EVEN Conn_01x05 | PinSocket_1x05_P2.54mm_Vertical | J4 |
| 1 | BAT | JST_VH_B2PS-VH_1x02_P3.96mm_Horizontal | J5 |
| 1 | DBG | JST_ZH_B4B-ZR_1x04_P1.50mm_Vertical | J6 |
| 1 | M | JST_VH_B2PS-VH_1x02_P3.96mm_Horizontal | J7 |
| 1 | USB_C_Receptacle_USB2.0 | USB_C_Receptacle_XKB_U262-16XN-4BVC11 | J9 |
| 2 | SW_SPST | SW_SPST_TL3342 | SW1, SW2 |
| 1 | B5819W SL | D_SOD-123 | D1 |
Show 41 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1N5819WS SK32WA | D_SOD-123 | D2 |
| 1 | KT-0603R B5819W SL | D_SOD-123 | D3 |
| 1 | KT-0805G LED | LED_0603_1608Metric | D4 |
| 1 | 1N5819WS B5819W SL | D_SOD-123 | D5 |
| 1 | GZ2012D101TF | L_0805_2012Metric | FB1 |
| 1 | 6U8 33uH | L_12x12mm_H8mm | L1 |
| 1 | 0U1 4u7 | C_1206_3216Metric | C1 |
| 4 | 100n | C_0603_1608Metric | C2, C3, C4, C5 |
| 1 | 4U7 100n | C_0603_1608Metric | C6 |
| 3 | 10U 100n | C_0603_1608Metric | C7, C9, C22 |
| 1 | 0U1 100n | C_0603_1608Metric | C8 |
| 1 | 2U2 12p | C_0402_1005Metric | C10 |
| 1 | 0U1 12p | C_0402_1005Metric | C11 |
| 1 | 2U2 10u | C_0805_2012Metric | C12 |
| 2 | 0U1 10u | C_0805_2012Metric | C13, C19 |
| 2 | 400p | C_0603_1608Metric | C14, C15 |
| 1 | 680uF | CP_Radial_D10.0mm_P5.00mm | C16 |
| 1 | 0U1 220uF | CP_EIA-7343-31_Kemet-D | C17 |
| 1 | 22P 100n | C_0603_1608Metric | C18 |
| 1 | 4U7 2u2 | C_0805_2012Metric | C20 |
| 1 | 10U 10u | C_0805_2012Metric | C21 |
| 1 | 10U 1u | C_0402_1005Metric | C23 |
| 1 | 100K 150K | R_0402_1005Metric | R1 |
| 1 | 100K 15K | R_0402_1005Metric | R2 |
| 1 | 100R 220 | R_0402_1005Metric | R3 |
| 1 | 100K 10K | R_0402_1005Metric | R4 |
| 1 | 470R R510 | R_2512_6332Metric | R5 |
| 1 | C22977 100K | R_0402_1005Metric | R6 |
| 1 | 22K 10K | R_0402_1005Metric | R7 |
| 1 | 10R 150 | R_0805_2012Metric | R8 |
| 1 | 100K | R_0402_1005Metric | R9 |
| 1 | 100K 47 | R_0402_1005Metric | R10 |
| 1 | 10K | R_0402_1005Metric | R11 |
| 1 | 150K 1k5 | R_0402_1005Metric | R12 |
| 1 | 0R50 10K | R_0402_1005Metric | R13 |
| 1 | 13K 10K | R_0402_1005Metric | R14 |
| 2 | 4K7 | R_0402_1005Metric | R15, R16 |
| 1 | 160K 4K7 | R_0402_1005Metric | R17 |
| 1 | 100K 5R1 | R_2512_6332Metric | R18 |
| 1 | 100K 220 | R_0402_1005Metric | R20 |
| 1 | 200K 2K4 | R_0402_1005Metric | R21 |
Jantteri motor pwr design files
The KiCad project lives in the OJ2016/pcb-common repository on GitHub; these links point at the commit this page was built from.
Jantteri motor pwr: common questions
What microcontroller does the Jantteri motor pwr use?
The Jantteri motor pwr is built around the BQ24610, from the STM32 family.
How big is the Jantteri motor pwr PCB?
The Jantteri motor pwr measures 137.7 × 45 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Jantteri motor pwr?
72 components, from 61 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Jantteri motor pwr design files?
From the OJ2016/pcb-common repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Jantteri motor pwr design in my own project?
The repository has no license, so all rights stay with OJ2016. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Jantteri motor pwr without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in pcb-common
Jantteri right
63.8 × 63.8 mm89 parts2LNo license1
Jantteri secondary
90.6 × 20.3 mm58 parts2LNo license1
STM32Jantteri left
63.8 × 63.8 mm55 parts2LNo license1
Jantteri testrack interface
130.2 × 51.8 mm53 parts2LNo license1
STM32Jantteri motor pwr old
40 × 80.7 mm52 parts2LNo license1
ESP32Jantteri main
78.5 × 34.3 mm44 parts2LNo license1
STM32Jantteri hit detector
80 × 15.1 mm30 parts2LNo license1
STM32Jantteri lora
40.2 × 17.5 mm24 parts2LNo license1
Eth uart breakout
60 × 39.3 mm14 parts2LNo license1
Similar boards
STM32AxxSolder
AxxAxx
39 × 82.5 mm122 parts2LGPL-3.01.7k
STM32AIOC
skuep
21 × 31.5 mm47 parts2LMIT1.4k
STM32Ferris
pierrechevalier83
208.8 × 86.8 mm102 parts2LSHL-2.11.3k
STM32Module 16S
stuartpittaway
71.1 × 89.6 mm113 parts4LCC-BY-NC-4.01.1k
STM32Djinn
tzarc
192.3 × 150.5 mm216 parts2LCERN-OHL-S-2.0988
STM32Ghoul
228.6 × 79.4 mm163 parts2LCERN-OHL-S-2.0988