Jantteri motor pwr old
About the Jantteri motor pwr old PCB
Jantteri motor pwr old is an open source STM32 PCB design by OJ2016, published on GitHub. It is a 2-layer board measuring 40 × 80.7 mm, with 52 components from 44 distinct parts.
Its main chip is the DRV8848, from the STM32 family. Other key parts include the STUSB4500QTR, BQ24610, AMS1117-3.3, CP2102N-A01-GQFN28 and HT75XX-1-SOT89. By type, the board carries 21 capacitors, 8 resistors, 7 ICs, 7 connectors, 3 transistors and 2 diodes.
Main components on the Jantteri motor pwr old
Jantteri motor pwr old bill of materials (BOM)
52 components, 44 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STUSB4500QTR lora-mod | lora-mod | U1 |
| 1 | DRV8848 STM32G030C8T6 | LQFP-48_7x7mm_P0.5mm | U2 |
| 1 | BQ24610 AP2301 | MSOP-8-1EP_3x3mm_P0.65mm_EP1.68x1.88mm | U3 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U4 |
| 1 | CP2102N-A01-GQFN28 AP2301 | MSOP-8-1EP_3x3mm_P0.65mm_EP1.68x1.88mm | U5 |
| 1 | HT75XX-1-SOT89 LM2596S-5 | TO-263-5_TabPin3 | U6 |
| 1 | HT75XX-1-SOT89 DRV8848 | TSSOP-16-1EP_4.4x5mm_P0.65mm | U7 |
| 1 | AP3407 PDN3909S | SOT-23 | Q1 |
| 2 | AP3404S IRLML6402TRPBF | SOT-23 | Q2, Q3 |
| 1 | 16MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | USB_C_RECEPTACLE_USB2.0 Conn_01x06_Male | JST_ZH_B6B-ZR_1x06_P1.50mm_Vertical | J1 |
| 1 | CONN_01X02_MALE SWD | PinHeader_2x05_P1.27mm_Horizontal | J2 |
| 1 | CONN_01X02_MALE DBG | JST_ZH_B4B-ZR_1x04_P1.50mm_Vertical | J3 |
| 1 | CONN_02X08_ODD_EVEN POT | JST_ZH_B3B-ZR_1x03_P1.50mm_Vertical | J4 |
| 1 | 12V | PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | PWR-SW | PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | M | PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | C58066 | Fuseholder_Cylinder-5x20mm_Stelvio-Kontek_PTF78_Horizontal_Open | F1 |
| 1 | LED | LED_0603_1608Metric | D1 |
| 1 | 1N5819WS SK32WA | D_SOD-123F | D2 |
Show 24 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | GZ2012D101TF | L_0805_2012Metric | FB1 |
| 1 | 6U8 33uH | L_12x12mm_H8mm | L1 |
| 1 | 0U1 4u7 | C_1206_3216Metric | C1 |
| 6 | 100n | C_0603_1608Metric | C2, C3, C4, C5, C14, C15 |
| 1 | 4U7 100n | C_0603_1608Metric | C6 |
| 1 | 10U 100n | C_0603_1608Metric | C7 |
| 1 | 0U1 12p | C_0402_1005Metric | C8 |
| 1 | 10U 12p | C_0402_1005Metric | C9 |
| 1 | 2U2 100n | C_0603_1608Metric | C10 |
| 1 | 0U1 100n | C_0603_1608Metric | C11 |
| 1 | 2U2 10u | C_0805_2012Metric | C12 |
| 2 | 0U1 10u | C_0805_2012Metric | C13, C19 |
| 1 | 680uF | CP_Radial_D10.0mm_P5.00mm | C16 |
| 1 | 0U1 220uF | CP_EIA-7343-31_Kemet-D | C17 |
| 1 | 22P 100n | C_0603_1608Metric | C18 |
| 1 | 4U7 2u2 | C_0805_2012Metric | C20 |
| 1 | 10U 10u | C_0805_2012Metric | C21 |
| 2 | 100K 4K7 | R_0805_2012Metric | R1, R2 |
| 1 | 100R 47 | R_0402_1005Metric | R3 |
| 1 | 100K 1k5 | R_0402_1005Metric | R4 |
| 1 | 470R 100K | R_0402_1005Metric | R5 |
| 1 | C22977 100K | R_0402_1005Metric | R6 |
| 1 | 22K 10K | R_0402_1005Metric | R7 |
| 1 | 10R 150 | R_0805_2012Metric | R8 |
Jantteri motor pwr old design files
The KiCad project lives in the OJ2016/pcb-common repository on GitHub; these links point at the commit this page was built from.
Jantteri motor pwr old: common questions
What microcontroller does the Jantteri motor pwr old use?
The Jantteri motor pwr old is built around the DRV8848, from the STM32 family.
How big is the Jantteri motor pwr old PCB?
The Jantteri motor pwr old measures 40 × 80.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Jantteri motor pwr old?
52 components, from 44 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Jantteri motor pwr old design files?
From the OJ2016/pcb-common repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Jantteri motor pwr old design in my own project?
The repository has no license, so all rights stay with OJ2016. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Jantteri motor pwr old without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in pcb-common
Jantteri right
63.8 × 63.8 mm89 parts2LNo license1
STM32Jantteri motor pwr
137.7 × 45 mm72 parts2LNo license1
Jantteri secondary
90.6 × 20.3 mm58 parts2LNo license1
STM32Jantteri left
63.8 × 63.8 mm55 parts2LNo license1
Jantteri testrack interface
130.2 × 51.8 mm53 parts2LNo license1
ESP32Jantteri main
78.5 × 34.3 mm44 parts2LNo license1
STM32Jantteri hit detector
80 × 15.1 mm30 parts2LNo license1
STM32Jantteri lora
40.2 × 17.5 mm24 parts2LNo license1
Eth uart breakout
60 × 39.3 mm14 parts2LNo license1
Similar boards
STM32LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7k
STM32AxxSolder
AxxAxx
39 × 82.5 mm122 parts2LGPL-3.01.7k
STM32AIOC
skuep
21 × 31.5 mm47 parts2LMIT1.4k
STM32Ferris
pierrechevalier83
208.8 × 86.8 mm102 parts2LSHL-2.11.3k
STM32Module 16S
stuartpittaway
71.1 × 89.6 mm113 parts4LCC-BY-NC-4.01.1k
STM32Djinn
tzarc
192.3 × 150.5 mm216 parts2LCERN-OHL-S-2.0988