Jantteri testrack interface
About the Jantteri testrack interface PCB
Jantteri testrack interface is an open source PCB design by OJ2016, published on GitHub. It is a 2-layer board measuring 130.2 × 51.8 mm, with 53 components from 41 distinct parts.
Other key parts include the STUSB4500QTR, DRV8848, BQ24610, OMRON-G5CA and CP2102N-A01-GQFN28. By type, the board carries 20 resistors, 13 connectors, 10 transistors, 5 ICs and 5 diodes.
Main components on the Jantteri testrack interface
Jantteri testrack interface bill of materials (BOM)
53 components, 41 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STUSB4500QTR OMRON-G5CA | OMRON-G5CA | U1 |
| 1 | DRV8848 OMRON-G5CA | OMRON-G5CA | U2 |
| 1 | BQ24610 OMRON-G5CA | OMRON-G5CA | U3 |
| 1 | OMRON-G5CA | OMRON-G5CA | U4 |
| 1 | CP2102N-A01-GQFN28 OMRON-G5CA | OMRON-G5CA | U5 |
| 4 | AP3407 BC337 | TO-92_Inline | Q1, Q5, Q6, Q7 |
| 3 | AP3404S BC337 | TO-92_Inline | Q2, Q3, Q4 |
| 3 | BC337 | TO-92_Inline | Q8, Q9, Q10 |
| 1 | USB_C_RECEPTACLE_USB2.0 Conn_02x07_Odd_Even | PinSocket_2x07_P2.54mm_Vertical | J1 |
| 1 | CONN_01X02_MALE Conn_01x14 | PinSocket_1x14_P2.54mm_Vertical | J2 |
| 1 | CONN_01X02_MALE Conn_02x07_Odd_Even | PinSocket_2x07_P2.54mm_Vertical | J3 |
| 1 | CONN_02X08_ODD_EVEN 12V-IN | terminalblock_removable_1x2 | J4 |
| 1 | Conn_01x14 | PinSocket_1x14_P2.54mm_Vertical | J5 |
| 1 | 5V-IN | terminalblock_removable_1x2 | J6 |
| 1 | PWR_OUT1 | TerminalBlock_bornier-2_P5.08mm | J7 |
| 1 | PWR_OUT2 | TerminalBlock_bornier-2_P5.08mm | J8 |
| 1 | PWR_OUT3 | TerminalBlock_bornier-2_P5.08mm | J9 |
| 1 | PWR_OUT5 | TerminalBlock_bornier-2_P5.08mm | J10 |
| 1 | PWR_OUT4 | TerminalBlock_bornier-2_P5.08mm | J11 |
| 1 | PWR12 | TerminalBlock_bornier-2_P5.08mm | J12 |
Show 21 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PWR5 | TerminalBlock_bornier-2_P5.08mm | J13 |
| 1 | 1N5818 | D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 2 | 1N5819WS 1N5818 | D_DO-41_SOD81_P10.16mm_Horizontal | D2, D5 |
| 1 | KT-0603R 1N5818 | D_DO-41_SOD81_P10.16mm_Horizontal | D3 |
| 1 | KT-0805G 1N5818 | D_DO-41_SOD81_P10.16mm_Horizontal | D4 |
| 4 | 100K 0 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R4, R18 |
| 1 | 100R 0 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
| 1 | 470R 0 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5 |
| 1 | C22977 0 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R6 |
| 1 | 100K 1K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R10 |
| 1 | 10K 1K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R11 |
| 1 | 150K 1K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R12 |
| 1 | 0R50 10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R13 |
| 1 | 13K 10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R14 |
| 1 | 10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R15 |
| 2 | 0 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R16, R19 |
| 1 | 160K 0 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R17 |
| 1 | 200K 1K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R22 |
| 1 | 30K 1K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R23 |
| 1 | 100R 10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R24 |
| 1 | 33R 10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R25 |
Jantteri testrack interface design files
The KiCad project lives in the OJ2016/pcb-common repository on GitHub; these links point at the commit this page was built from.
Jantteri testrack interface: common questions
How big is the Jantteri testrack interface PCB?
The Jantteri testrack interface measures 130.2 × 51.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Jantteri testrack interface?
53 components, from 41 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Jantteri testrack interface design files?
From the OJ2016/pcb-common repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Jantteri testrack interface design in my own project?
The repository has no license, so all rights stay with OJ2016. Use it as a reference, and ask the author before reusing the design.
More boards in pcb-common
Jantteri right
63.8 × 63.8 mm89 parts2LNo license1
STM32Jantteri motor pwr
137.7 × 45 mm72 parts2LNo license1
Jantteri secondary
90.6 × 20.3 mm58 parts2LNo license1
STM32Jantteri left
63.8 × 63.8 mm55 parts2LNo license1
STM32Jantteri motor pwr old
40 × 80.7 mm52 parts2LNo license1
ESP32Jantteri main
78.5 × 34.3 mm44 parts2LNo license1
STM32Jantteri hit detector
80 × 15.1 mm30 parts2LNo license1
STM32Jantteri lora
40.2 × 17.5 mm24 parts2LNo license1
Eth uart breakout
60 × 39.3 mm14 parts2LNo license1