Smart fans system
OneAsmallFish·smart-fans-system·hardware/legacy/smart-fan-controller.kicad_pcb
About the Smart fans system PCB
Smart fans system is an open source ESP32 PCB design by OneAsmallFish, published on GitHub under the MIT license. It is a 2-layer board measuring 80 × 60 mm, with 16 components from 16 distinct parts.
Its main chip is the ESP32-S3-WROOM-1-N16R8, from the ESP32 family. Other key parts include the AMS1117-3.3, 74AHCT125 and BME280. By type, the board carries 8 connectors, 4 ICs, 3 switches and 1 LED.
It belongs with the iot & wireless and sensors designs in this gallery.
From the project
ESP32-S3 服务器智能风扇控制系统 | 4路PWM风扇 · 多传感器 · MQTT · Web仪表盘 · Home Assistant
ESP32-S3 powered server fan management — 8-channel PWM, multi-sensor, MQTT, Web dashboard, Home Assistant
🌐 Project Page · 📖 Deploy Guide · 🔧 Hardware Guide · 📡 MQTT Protocol
- 功能特性 - 系统架构 - 快速开始 - 硬件规格 - 软件组件 - Web 控制台 - Home Assistant 集成 - 项目结构 - 开发指南 - 许可证
- 12V ADC 分压:100kΩ + 20kΩ(ADC 输入≤2.0V,防止超出 ESP32-S3 ADC 上限3.1V) - WS2812B 3.3V 供电:3.3V 时 VIHmin=2.31V < ESP32 VOH=3.0V ✅;若5V供电则逻辑电平不足 - 不使用 SATA 3.3V 引脚**:改用 5V→LDO 方案,电流裕量更大且无 PWDIS 兼容性问题
Main components on the Smart fans system
Smart fans system bill of materials (BOM)
16 components, 16 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-3.3 AMS1117-3.3 SOT-223 | AMS1117-3.3-SOT223 | U1 |
| 1 | ESP32-S3-WROOM-1-N16R8 | ESP32-S3-WROOM-1 | U2 |
| 1 | 74AHCT125 74AHCT125 SOIC-14 | 74AHCT125-SOIC14 | U3 |
| 1 | BME280 BME280 LGA-8 | BME280-LGA8 | U4 |
| 1 | SATA-15P-STRAIGHT SATA-15PIN-PWR | SATA-15P | J1 |
| 1 | USB-C-16P USB-C 16P | USB-C-16P | J2 |
| 1 | FAN-4PIN-2.54 FAN1 | FAN-4PIN-2.54 | J3 |
| 1 | FAN-4PIN-2.54 FAN2 | FAN-4PIN-2.54 | J4 |
| 1 | FAN-4PIN-2.54 FAN3 | FAN-4PIN-2.54 | J5 |
| 1 | FAN-4PIN-2.54 FAN4 | FAN-4PIN-2.54 | J6 |
| 1 | KF2510-3P DS18B20-1 | TERMINAL-3P-XH254 | J7 |
| 1 | KF2510-3P DS18B20-2 | TERMINAL-3P-XH254 | J8 |
| 1 | RST | SW-6x6 | SW1 |
| 1 | BOOT | SW-6x6 | SW2 |
| 1 | WIFI CFG | SW-6x6 | SW3 |
| 1 | WS2812B-2020 WS2812B VCC=3.3V | WS2812B-2020 | LED1 |
Smart fans system design files
The KiCad project lives in the OneAsmallFish/smart-fans-system repository on GitHub; these links point at the commit this page was built from.
Smart fans system: common questions
What microcontroller does the Smart fans system use?
The Smart fans system is built around the ESP32-S3-WROOM-1-N16R8, from the ESP32 family.
How big is the Smart fans system PCB?
The Smart fans system measures 80 × 60 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Smart fans system?
16 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Smart fans system design files?
From the OneAsmallFish/smart-fans-system repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Smart fans system design in my own project?
Yes, under the terms of its MIT license, which OneAsmallFish chose for the repository.
Can I test firmware for the Smart fans system without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k