Tiav3 s14160
About the Tiav3 s14160 PCB
Tiav3 s14160 is an open source PCB design by OpenSiPM, published on GitHub under the MIT license. It is a 4-layer board measuring 25.4 × 25.4 mm, with 22 components from 18 distinct parts.
Other key parts include the OPA847IDBVT. By type, the board carries 9 capacitors, 7 resistors, 2 connectors, 2 inductors, 1 IC and 1 diode.
It belongs with the power & battery designs in this gallery.
From the project
Single channel silicon photomultipliers for high-speed fluorescence imaging
The OpenSiPM project aims to design high performance, low cost detectors for fluorescense microscopy.
The sipm-bias-control repository contains the KiCAD design files for a high dynamic range silicon photomultiplier (SiPM) transimpedance amplifier, power suppply, and bias generator designed by Eben Olson and Michael Giacomelli. The repository is organized into separate folders for each component, with bias-control-lt8362 containing the design files for the high voltage bias generator, power-supply/power-supply-alt containing two equivilent opamp power supply boards, and the tiav3_s1XXXX…
Main components on the Tiav3 s14160
Tiav3 s14160 bill of materials (BOM)
22 components, 18 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | OPA847IDBVT | OPA847IDBVT | U1 |
| 1 | SSQ-103-01-G-D | PinHeader_2x03_P2.54mm_Vertical | J1 |
| 1 | Conn_Coaxial | SMB_Jack_Vertical | J2 |
| 1 | S14160-30 | S14160-30 | D2 |
| 1 | 33nH | L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L1 |
| 1 | 560nH | L_0603_1608Metric | L2 |
| 2 | 2.2u | C_1206_3216Metric | C1, C4 |
| 1 | 120pF | C_0402_1005Metric | C2 |
| 1 | 120p | C_0402_1005Metric | C3 |
| 4 | 1u | C_0402_1005Metric | C5, C6, C7, C9 |
| 1 | 22u | C_0603_1608Metric | C8 |
| 1 | 50 | R_0402_1005Metric | R1 |
| 1 | 1.5k | R_0402_1005Metric | R2 |
| 1 | 68 | R_0402_1005Metric | R3 |
| 1 | 3.0 | R_0402_1005Metric | R5 |
| 1 | 5k | R_0402_1005Metric | R7 |
| 1 | 10 | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R11 |
| 1 | 30 | R_0402_1005Metric | R23 |
Tiav3 s14160 design files
The KiCad project lives in the OpenSiPM/sipm-bias-control repository on GitHub; these links point at the commit this page was built from.
Tiav3 s14160: common questions
How big is the Tiav3 s14160 PCB?
The Tiav3 s14160 measures 25.4 × 25.4 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Tiav3 s14160?
22 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Tiav3 s14160 design files?
From the OpenSiPM/sipm-bias-control repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Tiav3 s14160 design in my own project?
Yes, under the terms of its MIT license, which OpenSiPM chose for the repository.
More boards in sipm-bias-control
Similar boards
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
ControllerCurrentShuntAddOn
stuartpittaway
26 × 16.9 mm9 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
Module 16S PassiveBalanceAddOn
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k
Cube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1k