7 open source boards using the OPA847IDBVT
Real designs built with the OPA847IDBVT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Sipm linear s14160
OpenSiPM
90.8 × 68.9 mm205 parts4LNo license7Sipm
mgiacomelli
25.3 × 25.3 mm26 parts2LNo license3Phmod
gallicchio
100 × 100 mm234 parts4LCERN-OHL-P-2.00Tiav3 s13360 3030VE
OpenSiPM
25.4 × 25.4 mm24 parts4LMIT44Tiav3 s14160
OpenSiPM
25.4 × 25.4 mm22 parts4LMIT44Tiav3
OpenSiPM
25.4 × 25.4 mm21 parts4LMIT44Amod a
gallicchio
100 × 100 mm188 parts4LCERN-OHL-P-2.00
The OPA847IDBVT in open source designs
The gallery holds 7 open source boards using the OPA847IDBVT from 4 GitHub repositories; a typical one measures about 25.4 × 25.4 mm and carries around 26 components.
86% use four copper layers or more, and 71% carry an open source license.
The most starred is Tiav3 s13360 3030VE by OpenSiPM.
What boards using the OPA847IDBVT are built for
OPA847IDBVT: common questions
Where can I find a OPA847IDBVT reference design?
Each of the 7 boards on this page is a real design using the OPA847IDBVT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How big is a typical board using the OPA847IDBVT?
The median is 25.4 × 25.4 mm, and 14% are two-layer designs.
What is the most popular open source board using the OPA847IDBVT?
By GitHub stars, Tiav3 s13360 3030VE by OpenSiPM, with 44 stars.
Can I simulate one of these boards using the OPA847IDBVT before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.