Scopefun hardware
About the Scopefun hardware PCB
Scopefun hardware is an open source FPGA PCB design by OWON-LILLIPUT, published on GitHub under the Custom license license. It is a 6-layer board measuring 100 × 160 mm, with 593 components from 109 distinct parts.
Its main chip is the XC7A35T-FTG256, from the FPGA family. Other key parts include the ADA4817-1, AD8337, ADA4932-1, LTC6754 and KAD5510P-25Q48. By type, the board carries 252 capacitors, 197 resistors, 42 diodes, 36 ICs, 11 inductors and 5 transistors.
From the project
hardware（scopefun 双通道虚拟示波器，基于 Kicad 的 PCB 工程）
This repository contains Scopefun hardware schematics and pcb layout files.
You will need Kicad to open hardware design files
Main components on the Scopefun hardware
Scopefun hardware bill of materials (BOM)
593 components, 109 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | ADA4817-1 | SOIC8 | U1, U2 |
| 2 | AD8337 | CP-8-2 | U3, U4 |
| 2 | ADA4932-1 | CP-16-2 | U5, U6 |
| 1 | LTC6754 | SC70-6 | U7 |
| 2 | KAD5510P-25Q48 | L48.7x7E | U8, U10 |
| 1 | SG3225VAN-250Mhz | 3.2X2.5_SMD_6_EPSON | U9 |
| 1 | LTC6957-2 | 12-MSOP | U11 |
| 1 | XC7A35T-FTG256 | BGA256_FTG256 | U12 |
| 1 | LTC4360-1 | SC70 | U13 |
| 1 | SN74AUP1T17DCKR | SC70-5 | U14 |
| 1 | 74AVCH16T245 | TSSOP48 | U15 |
| 1 | OPA2830 | TSSOP8 | U16 |
| 2 | LM393DGK | TSSOP8 | U17, U18 |
| 2 | SPX3819 | SOT23-5_EXAR | U19, U27 |
| 5 | MAX15053 | WLP-9 | U20, U21, U22, U25, U26 |
| 1 | MCP4251 | TSSOP14 | U23 |
| 1 | LM2776 | SOT23-6 | U24 |
| 1 | TPS72301 | SOT23-5 | U28 |
| 1 | CYUSB3014 | BGA121_0.8mm | U29 |
| 1 | M24M02-DR | SOIC8 | U30 |
Show 89 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DAC5662 | S-PQFP-G48 | U31 |
| 1 | AZ4558C | SOIC8 | U32 |
| 1 | MAX5501 | SSOP20 | U33 |
| 2 | OPA692 | SOT23-6 | U34, U35 |
| 1 | IS43TR16256A-125KBL | TW-BGA-96 | U36 |
| 4 | BSS138BKS | SOT363 | Q1, Q2, Q3, Q6 |
| 1 | DMN6040SSD | SOIC8 | Q4 |
| 1 | X_Crystal_19.2Mhz | XTAL-4 | X1 |
| 1 | DIL14_RA | DIL14_RA | J1 |
| 1 | SIL6 | SIL6 | J2 |
| 1 | USB3_TypeB | USB3_TypeB | P1 |
| 4 | BNC | BNC-5-1634556-0 | AWG1, AWG2, CH1, CH2 |
| 4 | CV_2.0-6.0_pF | SGC3 | CV1, CV2, CV3, CV4 |
| 1 | 1206L150 | R_1206 | F1 |
| 3 | FID_1mm_2mm | FID_1mm_2mm | FID1, FID2, FID3 |
| 2 | GDT_SG90 | GDT_SG | GDT1, GDT2 |
| 1 | WP-SMRA | WP-SMRA | GND_P1 |
| 1 | TERM-PCB-55-M3 | TERM-PCB-55-M3 | GND_P2 |
| 1 | HEATSINK | HS2 | HS2 |
| 2 | HS-ANC | HS-ANC | HS-ANC1, HS-ANC2 |
| 4 | AQY282SX | SOP-4 | RE1, RE2, RE8, RE9 |
| 5 | G6K-2F-Y-DC4.5 | G6K-2F-Y | RE3, RE4, RE5, RE6, RE7 |
| 12 | SHLD_FINGER_0820 | EMI_SHLD_FINGER_0820 | SHLD1, SHLD2, SHLD3, SHLD4, SHLD5, SHLD6, SHLD7, SHLD8 +4 |
| 3 | SLP3-300-100-F | SLP3-300-100-R | SLP1, SLP2, SLP3 |
| 3 | 598-8150-107F | LED_0805 | LED1, LED2, LED3 |
| 5 | 1N4148W | SOD123 | D5, D6, D9, D10, D11 |
| 16 | BAV199 | SOT23 | D7, D8, D29, D30, D31, D32, D33, D34 +8 |
| 4 | RB851YT2R | SOT-543 | D12, D13, D14, D15 |
| 1 | 82400102 | SOT23-6 | D16 |
| 1 | SP3010-04UTG | uDFN-10 | D17 |
| 1 | ESDA8V2-1J | SOD323 | D41 |
| 8 | ESD7002 | SOT323 | D42, D43, D44, D45, D46, D47, D50, D51 |
| 1 | MCP1501-12 | SOT23-6 | D52 |
| 1 | MCP1501-18 | SOT23-6 | D53 |
| 3 | LM431 | SOT23 | D54, D55, D56 |
| 1 | TLV431A | SOT23 | D57 |
| 6 | Z_68 | L_0805 | L1, L7, L8, L9, L10, L11 |
| 5 | L_4.7u | L_NRS | L2, L3, L4, L5, L6 |
| 2 | C_22n | C_0603 | C1, C2 |
| 2 | C_15p | C_0603 | C3, C5 |
| 2 | C_360p | C_0603 | C4, C6 |
| 94 | C_0.1u | C_0603 | C7, C8, C9, C10, C15, C16, C17, C18 +86 |
| 2 | C_390p | C_0603 | C11, C13 |
| 8 | C_0603 | C_0603 | C12, C14, C48, C52, C210, C213, C228, C229 |
| 13 | C_10n | C_0402 | C29, C30, C31, C32, C60, C61, C62, C64 +5 |
| 2 | C_2p | C_0603 | C33, C34 |
| 15 | C_22u | C_0805 | C38, C39, C100, C101, C102, C107, C120, C122 +7 |
| 9 | C_10u | C_0603 | C70, C127, C132, C138, C139, C240, C241, C242 +1 |
| 32 | C_10n | C_0603 | C74, C75, C76, C77, C78, C79, C82, C83 +24 |
| 5 | C_1n | C_0603 | C112, C113, C114, C130, C131 |
| 5 | C_180p | C_0603 | C116, C117, C118, C133, C134 |
| 7 | C_100u | C_1210 | C119, C121, C135, C136, C178, C179, C227 |
| 3 | C_1u | C_0603 | C124, C226, C250 |
| 5 | C_2.2u | C_0603 | C143, C224, C225, C232, C233 |
| 2 | C_12p | C_0603 | C160, C164 |
| 2 | C_0.1u | C_0402 | C169, C171 |
| 4 | C_47u | C_1210 | C180, C205, C206, C218 |
| 2 | C_1210 | C_1210 | C181, C188 |
| 12 | C_4.7u | C_0805 | C182, C183, C184, C185, C186, C187, C192, C196 +4 |
| 23 | C_u47 | C_0603 | C189, C190, C191, C193, C194, C195, C197, C198 +15 |
| 1 | C_0805 | C_0805 | C200 |
| 26 | R_1.02k | R_0603 | R1, R6, R7, R8, R44, R57, R64, R144 +18 |
| 11 | R_240R | R_0603 | R2, R3, R23, R24, R25, R26, R85, R86 +3 |
| 20 | R_56R | R_0603 | R4, R5, R129, R136, R142, R143, R145, R153 +12 |
| 4 | R_953k_0.1% | R_0805 | R9, R11, R16, R18 |
| 3 | R_47k | R_0603 | R10, R12, R126 |
| 17 | R_100R | R_0603 | R13, R14, R19, R20, R21, R22, R32, R33 +9 |
| 5 | R_49.9k | R_0603 | R15, R17, R99, R102, R128 |
| 4 | R_402R | R_0603 | R27, R28, R29, R30 |
| 3 | R_499R | R_0603 | R31, R91, R92 |
| 5 | R_6.8k | R_0603 | R36, R37, R165, R168, R170 |
| 12 | R_10k | R_0603 | R38, R41, R97, R98, R105, R110, R113, R114 +4 |
| 8 | R_2.2k | R_0603 | R39, R68, R115, R130, R131, R135, R137, R138 |
| 18 | R_100 | R_0402 | R40, R42, R43, R45, R46, R47, R48, R49 +10 |
| 3 | R_0R | R_0805 | R61, R62, R63 |
| 5 | R_4k7 | R_0603 | R66, R67, R146, R147, R182 |
| 12 | R_470R_0.33W | R_0603 | R69, R70, R71, R72, R73, R74, R75, R76 +4 |
| 4 | R_0R | R_0603 | R81, R82, R83, R84 |
| 2 | R_48.7R_0.25W | R_1206 | R89, R90 |
| 2 | R_499k | R_0603 | R93, R95 |
| 5 | R_22k | R_0603 | R94, R96, R106, R118, R166 |
| 2 | R_1.5k | R_0603 | R100, R101 |
| 3 | R_20k | R_0603 | R103, R116, R123 |
| 3 | R_15k | R_0603 | R104, R111, R112 |
| 5 | R_1R | R_0603 | R107, R108, R109, R119, R120 |
| 3 | R_100k | R_0603 | R125, R127, R133 |
| 2 | R_200R | R_0603 | R132, R172 |
| 1 | R_6.04k | R_0603 | R134 |
| 9 | RA_27R | R_CRA06E | R139, R140, R141, R174, R175, R176, R177, R178 +1 |
Scopefun hardware design files
The KiCad project lives in the OWON-LILLIPUT/scopefun-hardware repository on GitHub; these links point at the commit this page was built from.
Scopefun hardware: common questions
What microcontroller does the Scopefun hardware use?
The Scopefun hardware is built around the XC7A35T-FTG256, from the FPGA family.
How big is the Scopefun hardware PCB?
The Scopefun hardware measures 100 × 160 mm, has 6 copper layers and is 1.6 mm thick.
How many components are on the Scopefun hardware?
593 components, from 109 distinct parts. The full bill of materials is listed on this page.
Where can I download the Scopefun hardware design files?
From the OWON-LILLIPUT/scopefun-hardware repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Scopefun hardware design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.
Can I test firmware for the Scopefun hardware without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug FPGA firmware against it before you order a PCB.
Similar boards
FPGABase board
GlasgowEmbedded
80 × 49 mm222 parts4L0BSD2.2k
FPGAThunderscope Rev5.3
EEVengers
122.5 × 103.5 mm817 parts6LMIT1.3k
FPGAUsb sniffer
ataradov
58.2 × 38.1 mm86 parts2LBSD-3-Clause1.3k
FPGATomu, I'm
theacodes
13 × 9.4 mm40 parts4LMIT1.1k
FPGAIcepi zero
cheyao
65 × 30 mm143 parts4LSHL-2.1828
FPGASd2snes
mrehkopf
101.5 × 83 mm147 partsGPL-2.0717