8 open source boards using the TPS72301

Real designs built with the TPS72301, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

How designs wire the TPS72301

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the TPS72301 connects to, and the resistors, capacitors and other passives placed on it.

  • The NR/FB pin has a resistor to GND on 7 of 7 designs, most often 20 kΩ (then 38.3 kΩ).
  • The OUT pin has a capacitor to GND on 7 of 7 designs, most often 2.2 µF (then 4.7 µF).
  • The IN pin is tied to -5V on 6 of 7 designs.
  • The NR/FB pin has a series resistor on 4 of 7 designs, most often 22 kΩ.
GNDpin 1Connected to: GND 100%
INpin 2Connected to: -5V 86%
ENpin 3Connected to: TLV75801PDBV 29%, another IC 29% · -5V 29%
  • Capacitor to GND on 43% · 1 µF (1)
NR/FBpin 4Connected to: Signal 100%
  • Resistor to GND on 100% · 20 kΩ (2), 38.3 kΩ (2), 22.1 kΩ (1)
  • Series resistor on 57% · 22 kΩ (2)
  • Pull-up to -3.3V on 43% · 68.1 kΩ (2), 11.5 kΩ (1)
OUTpin 5Connected to: AD8337 29%, ADA4817-1 29%, ADA4932-1 29% · -3.3V 43%
  • Capacitor to GND on 100% · 2.2 µF (3), 4.7 µF (2)
  • Series resistor on 57% · 22 kΩ (2)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Sitina 1 Sensor Board by CameraNexus, 1p6V to m1p6V bias gum by esl-epfl, Scopefun hardware by OWON-LILLIPUT and 1p6V to m1p6V bias gum by esl-epfl.

The TPS72301 in open source designs

The gallery holds 8 open source boards using the TPS72301 from 7 GitHub repositories; a typical one measures about 74.1 × 82.8 mm and carries around 259 components.

100% use four copper layers or more, and 50% carry an open source license.

The most starred is Sitina 1 Sensor Board by CameraNexus.

Microcontrollers on boards using the TPS72301

What boards using the TPS72301 are built for

TPS72301: common questions

Where can I find a TPS72301 reference design?

Each of the 8 boards on this page is a real design using the TPS72301. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the TPS72301 NR/FB pin?

The NR/FB pin has a resistor to GND on 7 of 7 designs, most often 20 kΩ (then 38.3 kΩ). Counted from the KiCad layouts of 7 open source designs using the TPS72301.

How is the TPS72301 OUT pin connected?

The OUT pin has a capacitor to GND on 7 of 7 designs, most often 2.2 µF (then 4.7 µF). Counted from the KiCad layouts of 7 open source designs using the TPS72301.

How is the TPS72301 IN pin connected?

The IN pin is tied to -5V on 6 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the TPS72301.

What parts are used alongside the TPS72301?

The 24AA02E-OT, 74HC2G17GW, AD8337, AD9990 and ADA4800 appear in the most repositories here.

Which microcontrollers do boards using the TPS72301 use?

Most are built on FPGA (4) and STM32 (2).

How big is a typical board using the TPS72301?

The median is 74.1 × 82.8 mm, and 0% are two-layer designs.

What is the most popular open source board using the TPS72301?

By GitHub stars, Sitina 1 Sensor Board by CameraNexus, with 73 stars.

Can I simulate one of these boards using the TPS72301 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part