3 open source boards using the ADA4817-1
Real designs built with the ADA4817-1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
Scopefun hardware
OWON-LILLIPUT
100 × 160 mm593 parts6LCustom license6STM32
Fsorx
haunma
86 × 96 mm152 parts4LCC-BY-SA-4.01FPGA
Data sampling
J1DDERY
76.8 × 160.6 mm405 parts6LNo license0
The ADA4817-1 in open source designs
The gallery holds 3 open source boards using the ADA4817-1 from 3 GitHub repositories; a typical one measures about 86 × 160 mm and carries around 405 components.
100% use four copper layers or more, and 33% carry an open source license.
The most starred is Scopefun hardware by OWON-LILLIPUT.
Parts used alongside the ADA4817-1
ADA4817-1: common questions
Where can I find a ADA4817-1 reference design?
Each of the 3 boards on this page is a real design using the ADA4817-1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the ADA4817-1?
The AD8337, ADA4932-1, AZ4558C, CYUSB3014 and LM2776 appear in the most repositories here.
Which microcontrollers do boards using the ADA4817-1 use?
Most are built on FPGA (2) and STM32 (1).
How big is a typical board using the ADA4817-1?
The median is 86 × 160 mm, and 0% are two-layer designs.
What is the most popular open source board using the ADA4817-1?
By GitHub stars, Scopefun hardware by OWON-LILLIPUT, with 6 stars.
Can I simulate one of these boards using the ADA4817-1 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.