Wardriver
p1lotz·Wardriver·PCB/Wardriver.kicad_pcb
About the Wardriver PCB
Wardriver is an open source ESP32 PCB design by p1lotz, published on GitHub under the MIT license. It is a 2-layer board measuring 65 × 95 mm, with 40 components from 22 distinct parts.
Its main chip is the ESP32-S3-WROOM-1U-N16R8, from the ESP32 family. Other key parts include the CR2013-MI2120, TP4056_MICRO-USB_CHARGER_-_1A and AP2112K-3.3. By type, the board carries 11 resistors, 10 capacitors, 7 switches, 4 ICs, 4 diodes and 2 connectors.
It belongs with the iot & wireless, rf & radio and power & battery designs in this gallery.
From the project
Wardriver (the definition of a device scanning for wireless networks) but better! Featuring Wifi and Bluetooth scanning with a gps module, it's a great monitor as a small project (and as a Half-Life Hackclub project!!)
Hello yall! (My second README, have fun! <3) so this is a... wardriver! Well I like to call it a wi-fi/BLE scanner and monitor and I won't scan while from a moving vehicle but wardriver sounds cooler so yeah. # This is my second project which I actually did it all by myself (not unlike the software projects, let's not talk about those.)
This device scans wi-fi and bluetooth RFs and it also has GPS, and it uses the ESP32 Marauder (by justcallmekoko).

Main components on the Wardriver
Wardriver bill of materials (BOM)
40 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CR2013-MI2120 | CR2013-MI2120 | U1 |
| 1 | ESP32-S3-WROOM-1U-N16R8 | XCVR_ESP32-S3-WROOM-1U-N16R8 | U2 |
| 1 | TP4056_MICRO-USB_CHARGER_-_1A | MODULE_TP4056_MICRO-USB_CHARGER_-_1A | U3 |
| 1 | AP2112K-3.3 | SOT-23-5 | U4 |
| 1 | AO3401A | SOT-23 | Q1 |
| 1 | GY-NEO-M8N | GY-NEO-M8N | J1 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J2 |
| 1 | Battery | BatteryHolder_Keystone_1042_1x18650 | BT1 |
| 2 | SW_Push | SW_SPST_B3S-1000 | SW1, SW2 |
| 4 | Switch | SW_SPST_B3S-1000 | SW3, SW4, SW5, SW6 |
| 1 | slide switch | SW_Slide_SPDT_Angled_CK_OS102011MA1Q | SW7 |
| 1 | SS34 | D_SMA | D1 |
| 3 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2, D3, D4 |
| 1 | uF1 | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 4 | 100nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C4, C8, C10 |
| 2 | 22uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C5 |
| 2 | 10uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6, C7 |
| 1 | 10uF1 | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9 |
| 3 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3 |
| 3 | 330 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R5, R6 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 100k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R8, R9 |
| 2 | 5.1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10, R11 |
Wardriver design files
The KiCad project lives in the p1lotz/Wardriver repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/Wardriver.kicad_pcb
- SchematicPCB/Wardriver.kicad_sch
Wardriver: common questions
What microcontroller does the Wardriver use?
The Wardriver is built around the ESP32-S3-WROOM-1U-N16R8, from the ESP32 family.
How big is the Wardriver PCB?
The Wardriver measures 65 × 95 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Wardriver?
40 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the Wardriver design files?
From the p1lotz/Wardriver repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Wardriver design in my own project?
Yes, under the terms of its MIT license, which p1lotz chose for the repository.
Can I test firmware for the Wardriver without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k