5 open source boards using the TP4056_MICRO-USB_CHARGER_-_1A

Real designs built with the TP4056_MICRO-USB_CHARGER_-_1A, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the TP4056_MICRO-USB_CHARGER_-_1A

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TP4056_MICRO-USB_CHARGER_-_1A connects to, and the resistors, capacitors and other passives placed on it.

  • The OUT- pin is tied to GND on 5 of 5 designs.
  • The IN- pin is tied to GND on 4 of 5 designs.
  • The IN+ pin is tied to VBUS on 3 of 5 designs.
  • The OUT+ pin has a pull-up to VBAT_SENSE on 2 of 5 designs, most often 100 kΩ.
IN-pin IN_NConnected to: GND 80% · not connected 20%
IN+pin IN_PConnected to: VBUS 60% · not connected 20% · a signal 20%
OUT-pin OUT_NConnected to: GND 100%
OUT+pin OUT_PConnected to: Signal 80% · VCC 20%
  • Pull-up to VBAT_SENSE on 40% · 100 kΩ (2)

2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include CP by IslamHUFE, EBadge by pointblank-club, IoT-Enabled-WiFi-Router-UPS by HarshBotre and Wardriver by p1lotz.

The TP4056_MICRO-USB_CHARGER_-_1A in open source designs

The gallery holds 5 open source boards using the TP4056_MICRO-USB_CHARGER_-_1A from 5 GitHub repositories; a typical one measures about 65 × 66 mm and carries around 19 components.

80% are two-layer designs, the rest use four layers or more, and 60% carry an open source license.

The most starred is EBadge by pointblank-club.

Parts used alongside the TP4056_MICRO-USB_CHARGER_-_1A

Microcontrollers on boards using the TP4056_MICRO-USB_CHARGER_-_1A

What boards using the TP4056_MICRO-USB_CHARGER_-_1A are built for

TP4056_MICRO-USB_CHARGER_-_1A: common questions

Where can I find a TP4056_MICRO-USB_CHARGER_-_1A reference design?

Each of the 5 boards on this page is a real design using the TP4056_MICRO-USB_CHARGER_-_1A. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TP4056_MICRO-USB_CHARGER_-_1A OUT- pin connected?

The OUT- pin is tied to GND on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the TP4056_MICRO-USB_CHARGER_-_1A.

How is the TP4056_MICRO-USB_CHARGER_-_1A IN- pin connected?

The IN- pin is tied to GND on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the TP4056_MICRO-USB_CHARGER_-_1A.

How is the TP4056_MICRO-USB_CHARGER_-_1A IN+ pin connected?

The IN+ pin is tied to VBUS on 3 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the TP4056_MICRO-USB_CHARGER_-_1A.

What parts are used alongside the TP4056_MICRO-USB_CHARGER_-_1A?

The AP2112K-3.3, CR2013-MI2120 and ESP32-S3-WROOM-1U-N16R8 appear in the most repositories here.

Which microcontrollers do boards using the TP4056_MICRO-USB_CHARGER_-_1A use?

Most are built on ESP32 (3).

How big is a typical board using the TP4056_MICRO-USB_CHARGER_-_1A?

The median is 65 × 66 mm, and 80% are two-layer designs.

What is the most popular open source board using the TP4056_MICRO-USB_CHARGER_-_1A?

By GitHub stars, EBadge by pointblank-club, with 1 stars.

Can I simulate one of these boards using the TP4056_MICRO-USB_CHARGER_-_1A before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part