SlimeVR Tracker for ESP32C3 WROOM
About the SlimeVR Tracker for ESP32C3 WROOM PCB
SlimeVR Tracker for ESP32C3 WROOM is an open source ESP32 PCB design by Parabellum-Maker, published on GitHub. It is a 2-layer board measuring 42 × 48.1 mm, with 20 components from 12 distinct parts.
Its main chip is the ESP32-C3-WROOM-02, from the ESP32 family. Other key parts include the RT9080-33GJ5 and BNO085. By type, the board carries 5 resistors, 4 connectors, 4 capacitors, 3 ICs, 2 switches and 2 diodes.
From the project
Slimme VR Tracker for ESP32を使用する自作トラッカー基板のデータです。\ トラッカー基板上に保護回路などないため、使用する場合は注意が必要です。\ 基板に関して、性能評価や動作安定性、安全性(EMC試験など)の評価は実施していないことに留意ください。
Main components on the SlimeVR Tracker for ESP32C3 WROOM
SlimeVR Tracker for ESP32C3 WROOM bill of materials (BOM)
20 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RT9080-33GJ5 | TSOT-23-5_HandSoldering | U1 |
| 1 | ESP32-C3-WROOM-02 | ESP32-C3-WROOM-02 | U2 |
| 1 | BNO085 | BNO08X | U3 |
| 1 | ZX62R-B-5P_30_ | HRS_ZX62R-B-5P_30_ | J1 |
| 2 | Conn_01x02_Pin | AMASS_XT30PW-M_1x02_P2.50mm_Horizontal | J2, J3 |
| 1 | Conn_01x05_Pin | JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J4 |
| 2 | SW_Push | SW_PUSH_1P1T_6x3.5mm_H4.3_APEM_MJTP1243 | SW1, SW2 |
| 1 | D | D_SOD-323_HandSoldering | D1 |
| 1 | LED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2 |
| 3 | 10u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C4 |
| 1 | 1u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3 |
| 5 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4, R5 |
SlimeVR Tracker for ESP32C3 WROOM design files
The KiCad project lives in the Parabellum-Maker/SlimeVR_Tracker_for_ESP32C3_WROOM repository on GitHub; these links point at the commit this page was built from.
- LayoutSlimeVR_ESP32C3.kicad_pcb
- SchematicSlimeVR_ESP32C3.kicad_sch
SlimeVR Tracker for ESP32C3 WROOM: common questions
What microcontroller does the SlimeVR Tracker for ESP32C3 WROOM use?
The SlimeVR Tracker for ESP32C3 WROOM is built around the ESP32-C3-WROOM-02, from the ESP32 family.
How big is the SlimeVR Tracker for ESP32C3 WROOM PCB?
The SlimeVR Tracker for ESP32C3 WROOM measures 42 × 48.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SlimeVR Tracker for ESP32C3 WROOM?
20 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the SlimeVR Tracker for ESP32C3 WROOM design files?
From the Parabellum-Maker/SlimeVR_Tracker_for_ESP32C3_WROOM repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the SlimeVR Tracker for ESP32C3 WROOM design in my own project?
The repository has no license, so all rights stay with Parabellum-Maker. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the SlimeVR Tracker for ESP32C3 WROOM without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32Open Book Abridged Edition
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1k
ESP32Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0k
ESP32Esp32 minimal
36.2 × 26.8 mm20 parts2LMIT4.0k
ESP32Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k
ESP32Controller
29 × 74 mm58 parts4LApache-2.03.8k
ESP32Bitaxe
skot
56.5 × 99.8 mm86 parts4LCERN-OHL-S-2.01.4k