HardLabs

Reciever pcb v1

ParthDhiman32·DropSense·Dropsense_V1/RECIEVER/CAD/PCB/reciever pcb v1/reciever pcb v1.kicad_pcb

Reciever pcb v1 layout, top view — open source ESP32 board by ParthDhiman32

About the Reciever pcb v1

Reciever pcb v1 is an open source ESP32 PCB design by ParthDhiman32, published on GitHub. It is a 2-layer board measuring 50 × 60 mm, with 26 components from 23 distinct parts.

Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the TP4056-42-ESOP8 and ME6211C33M5. By type, the board carries 8 capacitors, 8 resistors, 3 ICs, 3 connectors, 2 switches and 2 diodes.

It belongs with the power & battery and iot & wireless designs in this gallery.

From the project

i am creating a product with two parts which you drop from a height and it calculates the height from which you dropped it using pure physics and electronics!!

Dropsense is a wireless embedded system project which logs and transmits data in real time what type of data exactly?- it transmits the height from which it is dropped, the time period of the drop and the maximum Gforce which the device accelerated to during the impact .

Basically it consists of two parts the sender and the reciever

This devise has hexagonal walls because they are better at abosrbing impacts!

Reciever pcb v1, from the project README
From the project README

Main components on the Reciever pcb v1

ESP32-S3-WROOM-1TP4056-42-ESOP8ME6211C33M5

Reciever pcb v1 bill of materials (BOM)

26 components, 23 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-S3-WROOM-1
U1
1
TP4056-42-ESOP8
TP4056
U2
1
ME6211C33M5
ME6211
U3
1
1.8inch TFT connector
J1
1
CONN_01X02
USB_B_Micro
J2
1
MICRO_SD_CARD_DET_HIROSE_DM3AT
Battery connector
J3
1
EN SW
SW1
1
IO0 SW
SW2
1
green
D2
1
red
D3
3
10UF
10uF
C1, C3, C8
1
0.1UF
10uF
C2
1
2.2NF
10uF
C4
1
100NF
0.1uF
C5
1
0.1UF
0.1uF
C6
1
0.1UF
1uF
C7
1
3.3KR
1kR
R1
1
330R
1kR
R2
1
330R
2kR
R3
1
10KR
10kR
R5
Show 3 more
QtyPartRefs
1
4.7KR
10kR
R6
1
4.7KR
100R
R7
2
10KR
100kr
R8, R9

Reciever pcb v1 design files

The KiCad project lives in the ParthDhiman32/DropSense repository on GitHub; these links point at the commit this page was built from.

Reciever pcb v1: common questions

What microcontroller does the Reciever pcb v1 use?

The Reciever pcb v1 is built around the ESP32-S3-WROOM-1, from the ESP32 family.

How big is the Reciever pcb v1?

The Reciever pcb v1 measures 50 × 60 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Reciever pcb v1?

26 components, from 23 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Reciever pcb v1 design files?

From the ParthDhiman32/DropSense repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Reciever pcb v1 design in my own project?

The repository has no license, so all rights stay with ParthDhiman32. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Reciever pcb v1 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in DropSense

Similar boards