Iris

PauSansa·iris-pcb-design

Iris PCB layout, top view — open source ESP32 board by PauSansa

About the Iris PCB

Iris is an open source ESP32 PCB design by PauSansa, published on GitHub. It is a 2-layer board measuring 64.5 × 31 mm, with 20 components from 15 distinct parts.

Its main chip is the ESP32-WROOM-32, from the ESP32 family. Other key parts include the USBLC6-2P6, CP2102N-Axx-xQFN28, AMS1117-3.3 and MAX98357A. By type, the board carries 5 ICs, 5 resistors, 4 capacitors, 3 connectors, 2 switches and 1 diode.

It belongs with the audio and usb & debug tools designs in this gallery.

From the project

KiCad 9 PCB design for a hardware device that polls a REST API for pending TTS audio notifications and plays them through a speaker.

KiCad 9 PCB design for a hardware device that polls a REST API for pending TTS audio notifications and plays them through a speaker.

The board integrates an ESP32-WROOM-32 as the main microcontroller, a CP2102N for USB-Serial communication (programming and debugging), an AMS1117-3.3 to regulate the 5V USB input down to 3.3V, and a MAX98357A I2S amplifier to drive the speaker.

Main components on the Iris

Iris bill of materials (BOM)

20 components, 15 distinct parts.

QtyPartRefs
1
USBLC6-2P6
U1
1
CP2102N-Axx-xQFN28
U2
1
AMS1117-3.3
U3
1
ESP32-WROOM-32
U4
1
MAX98357A
U5
1
USB_C_Receptacle_USB2.0_16P
J1
1
Conn_01x03
J2
1
Conn_01x02
J3
2
SW_Push
SW1, SW2
1
LED
D1
2
100nF
C1, C2
2
10µF
C3, C4
2
5.1K
R1, R2
2
10K
R3, R5
1
330
R4

Iris design files

The KiCad project lives in the PauSansa/iris-pcb-design repository on GitHub; these links point at the commit this page was built from.

Iris: common questions

What microcontroller does the Iris use?

The Iris is built around the ESP32-WROOM-32, from the ESP32 family.

How big is the Iris PCB?

The Iris measures 64.5 × 31 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Iris?

20 components, from 15 distinct parts. The full bill of materials is listed on this page.

Where can I download the Iris design files?

From the PauSansa/iris-pcb-design repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Iris design in my own project?

The repository has no license, so all rights stay with PauSansa. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Iris without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards