MkrfoxWindShield

pcaunegre·MkrfoxWindShield·hardware/Shield.kicad_pcb

MkrfoxWindShield PCB layout, top view — open source board by pcaunegre

About the MkrfoxWindShield PCB

MkrfoxWindShield is an open source PCB design by pcaunegre, published on GitHub under the Unlicense license. It is a 2-layer board measuring 81.6 × 39.7 mm, with 31 components from 17 distinct parts.

Other key parts include the C16581. By type, the board carries 8 resistors, 6 diodes, 5 capacitors, 2 connectors, 1 IC and 1 switch.

It belongs with the sensors, dev boards & breakouts and power & battery designs in this gallery.

From the project

Arduino Mkrfox1200 interface to wind sensors

OpenWindMap is a network of wind sensors (https://www.openwindmap.org), collecting data from the devices via the Sigfox network.

This project is about building a device (hardware and software) to process the measurements from commercial wind sensors and send data via Sigfox messages (8 bits every 10min). The device is powered by a small battery and a solar panel (power management is included on the shield).

MkrfoxWindShield, from the project README
From the project README

Main components on the MkrfoxWindShield

MkrfoxWindShield bill of materials (BOM)

31 components, 17 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
C16581
TP4056-42-ESOP8
IC1
1
C124407
CONN_14_1
P1
1
C124407
CONN_14_2
P2
3
KF350-3.5-2P
ExtSwitch1, J_BAT2, J_NTC1
2
C474892
KF350-3.5-2P
JS1, JS2
1
PH-2AK
J_BAT1
1
WJ500V-5.08-2P
J_PV1
1
DS1133-S60APS
J_SENSOR1
1
C221666
JS202011SCQN
SW1
6
C169540
1N5819W
D1, D2, D3, D4, D5, D6
3
C1710
10n
C1, C2, C3
2
C95841
10u
C4, C5
3
C11702
1K
R1, R2, R3
2
C25744
10K
R4, R7
1
C25782
390k
R5
1
C25741
100k
R6
1
C25765
20K
R8

MkrfoxWindShield design files

The KiCad project lives in the pcaunegre/MkrfoxWindShield repository on GitHub; these links point at the commit this page was built from.

MkrfoxWindShield: common questions

How big is the MkrfoxWindShield PCB?

The MkrfoxWindShield measures 81.6 × 39.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the MkrfoxWindShield?

31 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the MkrfoxWindShield design files?

From the pcaunegre/MkrfoxWindShield repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the MkrfoxWindShield design in my own project?

Yes, under the terms of its Unlicense license, which pcaunegre chose for the repository.

Similar boards