Smart-Light-Bar
Pegoku·Smart-Light-Bar·Smart-Light-Bar-PCB/Smart-Light-Bar-PCB.kicad_pcb
About the Smart-Light-Bar PCB
Smart-Light-Bar is an open source ESP32 PCB design by Pegoku, published on GitHub. It is a 2-layer board measuring 300 × 30 mm, with 72 components from 29 distinct parts.
Its main chip is the ESP-WROOM-32E, from the ESP32 family. Other key parts include the TPS2116DRLR, LM2940S-3.3, TP4056_C725790, DW01A and XL-B524SURUGW. By type, the board carries 25 capacitors, 17 LEDs, 15 resistors, 7 ICs, 3 switches and 1 transistor.
It belongs with the power & battery designs in this gallery.
From the project
This project is a Smart Light Bar designed using KiCad. It uses SKC6812RGBW LEDs for a RGBW lighting effect. The Smart Light Bar is controlled using an ESP32 and can be powered directly via USB-C or the internal Lithium battery.

Main components on the Smart-Light-Bar
Smart-Light-Bar bill of materials (BOM)
72 components, 29 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS2116DRLR | SOT-583-8_L2.1-W1.6-P0.50-LS1.6-BL | U1 |
| 1 | LM2940S-3.3 | SOT-223-3_L6.5-W3.4-P2.30-LS7.0-BR | U2 |
| 1 | TP4056_C725790 | ESOP-8_L4.9-W3.9-P1.27-LS6.0-BL-EP | U3 |
| 1 | DW01A | SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BL | U4 |
| 1 | XL-B524SURUGW | LED-TH_3P-BD5.8-P2.54_C9900027878 | U5 |
| 1 | TP5188 | ESOP-8_L4.9-W3.9-P1.27-LS6.0-BL-EP-1 | U6 |
| 1 | ESP-WROOM-32E | COMM-SMD_ESP-WROOM-32D | U7 |
| 1 | FS8205A | TSSOP-8_L4.4-W3.0-P0.65-LS6.4-BL-2 | Q1 |
| 1 | CONN_01X03 Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | Battery_Cell | JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical | BT1 |
| 2 | C720477 TS | SW-SMD_L3.9-W3.0-P4.45 | SW1, SW2 |
| 1 | EC11G1534414 | SW-TH_EC11G1534414 | SW4 |
| 1 | C668623 TYPE-C 6P(073) | TYPE-C-SMD_TYPE-C-6P_5 | USB1 |
| 16 | SKC6812RGBW-WS | LED-SMD_4P-4.9-W4.9-LS5.0-BR | LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8 +8 |
| 1 | RED-0603 | LED0603-RD_RED | LED31 |
| 1 | 2.2UH 2.2uH | IND-SMD_L7.2-W6.6_GPSR07X0 | L1 |
| 2 | 10UF 10uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C3 |
| 1 | 0.1UF 0.1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2 |
| 21 | 10UF 10uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C4, C5, C6, C8, C9, C10, C11, C12 +13 |
| 1 | 22UF 22uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C7 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 10K 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R4, R15 |
| 2 | 47 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3 |
| 2 | 5.11K 5.11k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R7 |
| 1 | 68 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6 |
| 3 | 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8, R9, R10 |
| 1 | 1.2K 1.2k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11 |
| 1 | 100 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12 |
| 1 | 75K 75k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13 |
| 1 | 300K 300k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R14 |
Smart-Light-Bar design files
The KiCad project lives in the Pegoku/Smart-Light-Bar repository on GitHub; these links point at the commit this page was built from.
Smart-Light-Bar: common questions
What microcontroller does the Smart-Light-Bar use?
The Smart-Light-Bar is built around the ESP-WROOM-32E, from the ESP32 family.
How big is the Smart-Light-Bar PCB?
The Smart-Light-Bar measures 300 × 30 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Smart-Light-Bar?
72 components, from 29 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Smart-Light-Bar design files?
From the Pegoku/Smart-Light-Bar repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Smart-Light-Bar design in my own project?
The repository has no license, so all rights stay with Pegoku. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Smart-Light-Bar without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k