46 open source boards using the TPS2116DRLR
Real designs built with the TPS2116DRLR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Silkscreen
iandchasse
60 × 111.3 mm171 parts2LCERN-OHL-S-2.0585STM32
SmartPrintCoreH7x
BoltzRnD
170.1 × 96.9 mm530 parts2LGPL-3.089ESP32
Endeavour2
petrmikheev
100 × 85 mm263 parts6LGPL-3.049ESP32
Esp atx power
valletw
76.6 × 25.1 mm51 parts4LMIT29MistMaker-Battery-Kit
Dav1dyang
38 × 25.1 mm54 parts2LMIT26STM32
Twinusb
s-t-e-f-a-n
63 × 20 mm112 parts4LNo license7STM32
UniversalFluxInterface
Axel051171
110 × 97 mm173 parts4LMIT3ESP32
ESP32-S3 6 Motor Driver IMU
Amronos
72.5 × 55 mm92 parts4LNo license2- schematic only · 40 partsESP32
Moto Audio
bacnbit
40 partsNo license2 STM32
Bldc esc
EwoudVV
544 × 768 mm421 parts4LNo license1ESP32
Benchpod
embeddedci-com
82 × 90 mm306 parts4LCERN-OHL-W-2.01STM32
ArtNetNode Full
vili111111p
200 × 165 mm218 parts4LNo license1ESP32
Roadster course
jeffreydthompson
60 × 40 mm79 parts4LCC-BY-4.01Lora daq module
danielkm-ee
70 × 40 mm78 parts4LMIT1RP2040/RP2350
Open power profiler
Guiimartinho
150 × 100 mm365 parts4LMIT0ESP32
DroneMagNav2.0
ajisrawi
128 × 84 mm218 parts4LCustom license0STM32
Bat trial tracks only
vexpaer
100 × 30 mm159 parts4LCERN-OHL-S-2.00AVR/Arduino
Amiga-1000-keyboard project
steveed
389.3 × 145 mm127 parts2LCC-BY-NC-4.00AVR/Arduino
Raspberry Pi Compute Module 5 Drone Carrier
AMLing2
56.2 × 70.5 mm121 parts4LMIT0Automotive-BLE-CAN-Gateway
colonelblacc
59.9 × 47.8 mm113 parts4LMIT0ESP32
MOTOR-BOARD
Shaurya-Ashu
102 × 73.4 mm95 parts4LMIT0STM32
Budgetcan g4-hw
dbstephan
76.2 × 38.1 mm92 parts4LMIT0STM32
Dreamscape-F405-2020
sneakylizard123-4
32 × 35 mm83 parts6LNo license0Nordic nRF
-NRF LoRa
JBeeBK
60 × 45 mm78 parts4LNo license0ESP32
Smart-Light-Bar
Pegoku
300 × 30 mm72 parts2LNo license0STM32
LCRmeter
ironiron
64 × 55.3 mm68 parts2LMIT0RP2040/RP2350
Noctra-Devboard
lekangji
21 × 51 mm67 parts4LNo license0STM32
Drone mark4
Keyrim
36 × 36 mm66 parts4LMIT0- schematic only · 119 partsSTM32
WMDEA
PConde33
119 parts4LNo license0 - schematic only · 35 parts
CycleSync
Jorgeto0
35 partsNo license0 ESP32
Endeavour2 upd
petrmikheev
100 × 85 mm238 parts6LGPL-3.049ESP32
Dash
sundevilmotorsports
130 × 81 mm105 parts4LNo license2STM32
ArtNetNode Lite
vili111111p
200 × 165 mm201 parts4LNo license1Pi hat ups
Doenec
65 × 56 mm62 parts4LMIT1STM32
Gpio bank v2 tracks only
vexpaer
100 × 30 mm159 parts4LCERN-OHL-S-2.00Rov usb
samnadol
55.5 × 68.5 mm133 parts4LNo license0
How designs wire the TPS2116DRLR
Read from the KiCad layouts of 31 open source designs, one per repository: what each pin of the TPS2116DRLR connects to, and the resistors, capacitors and other passives placed on it.
- The PR1 pin has a resistor to GND on 24 of 31 designs, most often 10 kΩ (then 100 kΩ).
- The VOUT pins have a decoupling capacitor on 22 of 31 designs, most often 10 µF (then 1 µF).
- The VIN1 pin has a decoupling capacitor on 22 of 31 designs, most often 1 µF (then 100 nF).
- The VIN2 pin has a decoupling capacitor on 19 of 31 designs, most often 1 µF (then 100 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 97% | — |
| VOUTpin 2, 7 | Connected to: 5V 71% · a signal 29% |
|
| VIN1pin 3 | Connected to: 5V 61% · a signal 39% |
|
| PR1pin 4 | Connected to: Signal 90% |
|
| VIN2pin 6 | Connected to: VBUS 68% · a signal 32% |
|
| STpin 8 | Connected to: The microcontroller 29% · not connected 29% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Silkscreen pcb by iandchasse, SmartPrintCoreH7x by BoltzRnD, Endeavour2 by petrmikheev and Esp atx power by valletw.
The TPS2116DRLR in open source designs
The gallery holds 46 open source boards using the TPS2116DRLR from 34 GitHub repositories; a typical one measures about 100 × 47.8 mm and carries around 124 components.
84% use four copper layers or more, and 63% carry an open source license.
The most starred is Silkscreen pcb by iandchasse.
Parts used alongside the TPS2116DRLR
Microcontrollers on boards using the TPS2116DRLR
What boards using the TPS2116DRLR are built for
TPS2116DRLR: common questions
Where can I find a TPS2116DRLR reference design?
Each of the 46 boards on this page is a real design using the TPS2116DRLR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the TPS2116DRLR PR1 pin?
The PR1 pin has a resistor to GND on 24 of 31 designs, most often 10 kΩ (then 100 kΩ). Counted from the KiCad layouts of 31 open source designs using the TPS2116DRLR.
What decoupling capacitors do designs use on the TPS2116DRLR VOUT pin?
The VOUT pins have a decoupling capacitor on 22 of 31 designs, most often 10 µF (then 1 µF). Counted from the KiCad layouts of 31 open source designs using the TPS2116DRLR.
What decoupling capacitors do designs use on the TPS2116DRLR VIN1 pin?
The VIN1 pin has a decoupling capacitor on 22 of 31 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 31 open source designs using the TPS2116DRLR.
What parts are used alongside the TPS2116DRLR?
The USBLC6-2SC6, AMS1117-3.3, DW01A, ADS1110A0IDBVR and BMI088 appear in the most repositories here.
Which microcontrollers do boards using the TPS2116DRLR use?
Most are built on STM32 (21), ESP32 (13), AVR/Arduino (2) and RP2040/RP2350 (2).
How big is a typical board using the TPS2116DRLR?
The median is 100 × 47.8 mm, and 16% are two-layer designs.
What is the most popular open source board using the TPS2116DRLR?
By GitHub stars, Silkscreen pcb by iandchasse, with 585 stars.
Can I simulate one of these boards using the TPS2116DRLR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.