5 open source boards using the TP4056_C725790

Real designs built with the TP4056_C725790, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the TP4056_C725790

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TP4056_C725790 connects to, and the resistors, capacitors and other passives placed on it.

  • The PROG pin has a resistor to GND on 5 of 5 designs, most often 4.7 kΩ (then 4 Ω).
  • The STDBY pin has a series resistor on 5 of 5 designs, most often 1 kΩ.
  • The CHRG pin has a series resistor on 5 of 5 designs, most often 1 kΩ.
  • The BAT pin is tied to BAT+ on 4 of 5 designs.
TEMPpin 1Connected to: GND 60% · not connected 40%
PROGpin 2Connected to: Signal 100%
  • Resistor to GND on 100% · 4.7 kΩ (2), 4 Ω (1), 100 kΩ (1)
GNDpin 3Connected to: GND 100%
BATpin 5Connected to: BAT+ 80% · a signal 20%
STDBYpin 6Connected to: Signal 100%
  • Series resistor on 100% · 1 kΩ (5)
CHRGpin 7Connected to: Signal 100%
  • Series resistor on 100% · 1 kΩ (5)
EPpin 9Connected to: GND 60% · not connected 40%

2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Sparkles old by hdsjulian, Pager by ambraglow, 2032Charger by Pegoku and Sparkles by hdsjulian.

The TP4056_C725790 in open source designs

The gallery holds 5 open source boards using the TP4056_C725790 from 5 GitHub repositories; a typical one measures about 44.7 × 55.3 mm and carries around 72 components.

80% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.

The most starred is Sparkles old by hdsjulian.

Parts used alongside the TP4056_C725790

Microcontrollers on boards using the TP4056_C725790

What boards using the TP4056_C725790 are built for

TP4056_C725790: common questions

Where can I find a TP4056_C725790 reference design?

Each of the 5 boards on this page is a real design using the TP4056_C725790. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the TP4056_C725790 PROG pin?

The PROG pin has a resistor to GND on 5 of 5 designs, most often 4.7 kΩ (then 4 Ω). Counted from the KiCad layouts of 5 open source designs using the TP4056_C725790.

What resistor goes on the TP4056_C725790 STDBY pin?

The STDBY pin has a series resistor on 5 of 5 designs, most often 1 kΩ. Counted from the KiCad layouts of 5 open source designs using the TP4056_C725790.

What resistor goes on the TP4056_C725790 CHRG pin?

The CHRG pin has a series resistor on 5 of 5 designs, most often 1 kΩ. Counted from the KiCad layouts of 5 open source designs using the TP4056_C725790.

What parts are used alongside the TP4056_C725790?

The ME6217C33M5G, XB4908A, XL-1608SYGC-06 and XL-1608UBC-04 appear in the most repositories here.

Which microcontrollers do boards using the TP4056_C725790 use?

Most are built on ESP32 (4).

How big is a typical board using the TP4056_C725790?

The median is 44.7 × 55.3 mm, and 80% are two-layer designs.

What is the most popular open source board using the TP4056_C725790?

By GitHub stars, Sparkles old by hdsjulian, with 2 stars.

Can I simulate one of these boards using the TP4056_C725790 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part