5 open source boards using the NEO-6M
Real designs built with the NEO-6M, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
EA5IOT GPSDO
EA5IOT
130.8 × 53.6 mm93 parts2LGPL-3.012ESP8266
DNS-Driveby-Hardware
LyndLabs
76 × 40 mm21 parts2LNo license5RP2040/RP2350
Default
pete529
14.4 × 40 mm21 parts2LMIT4ESP32
Esp32-gateway hw
monkeykingblack
100.3 × 76.2 mm72 parts2LNo license0RP2040/RP2350
Fristracker
TherealONE12
62.8 × 72.4 mm15 parts2LNo license0
How designs wire the NEO-6M
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the NEO-6M connects to, and the resistors, capacitors and other passives placed on it.
- The VCC_23 pin has a decoupling capacitor on 2 of 2 designs, most often 100 nF (then 10 µF).
- The USB_DM_5 pin is left unconnected on 2 of 3 designs.
- The USB_DP_6 pin is left unconnected on 2 of 2 designs.
- The VDDUSB_7 pin is left unconnected on 2 of 2 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| USB_DM_5pin 5 | Connected to: Not connected 67% · a signal 33% | — |
| USB_DP_6pin 6 | Connected to: Not connected 100% | — |
| VDDUSB_7pin 7 | Connected to: Not connected 100% | — |
| GND_10pin 10 | Connected to: GND 100% | — |
| GND_12pin 12 | Connected to: GND 100% | — |
| MOSI/CFG_COM0_14pin 14 | Connected to: Not connected 100% | — |
| MISO/CFG_COM1_15pin 15 | Connected to: Not connected 100% | — |
| CFG_GPS0/SCK_16pin 16 | Connected to: Not connected 100% | — |
| RESERVED_17pin 17 | Connected to: Not connected 100% | — |
| SDA2_18pin 18 | Connected to: Not connected 100% | — |
| SCL2_19pin 19 | Connected to: Not connected 100% | — |
| VCC_23pin 23 | Connected to: 3.3V 50% · a signal 50% |
|
| GND_24pin 24 | Connected to: GND 100% | — |
11 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include EA5IOT GPSDO by EA5IOT, DNS-Driveby-Hardware by LyndLabs, Default by pete529 and Esp32-gateway hw by monkeykingblack.
The NEO-6M in open source designs
The gallery holds 5 open source boards using the NEO-6M from 5 GitHub repositories; a typical one measures about 76 × 53.6 mm and carries around 21 components.
100% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.
The most starred is EA5IOT GPSDO by EA5IOT.
Microcontrollers on boards using the NEO-6M
What boards using the NEO-6M are built for
NEO-6M: common questions
Where can I find a NEO-6M reference design?
Each of the 5 boards on this page is a real design using the NEO-6M. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the NEO-6M VCC_23 pin?
The VCC_23 pin has a decoupling capacitor on 2 of 2 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 5 open source designs using the NEO-6M.
How is the NEO-6M USB_DM_5 pin connected?
The USB_DM_5 pin is left unconnected on 2 of 3 designs. Counted from the KiCad layouts of 5 open source designs using the NEO-6M.
How is the NEO-6M USB_DP_6 pin connected?
The USB_DP_6 pin is left unconnected on 2 of 2 designs. Counted from the KiCad layouts of 5 open source designs using the NEO-6M.
Which microcontrollers do boards using the NEO-6M use?
Most are built on RP2040/RP2350 (2), AVR/Arduino (1), ESP32 (1) and ESP8266 (1).
How big is a typical board using the NEO-6M?
The median is 76 × 53.6 mm, and 100% are two-layer designs.
What is the most popular open source board using the NEO-6M?
By GitHub stars, EA5IOT GPSDO by EA5IOT, with 12 stars.
Can I simulate one of these boards using the NEO-6M before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.