5 open source boards using the PICO_2_W
Real designs built with the PICO_2_W, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Default
pete529
14.4 × 40 mm21 parts2LMIT4Raspberry Pi
KRUPS Flight Computer
krups
127 × 64.4 mm108 parts6LNo license0RP2040/RP2350
Usbfloppy
cm68
233.4 × 154.9 mm11 parts2LNo license0Raspberry Pi
KRUPS-RocketStation
krups
87.6 × 56 mm34 parts4LNo license0Raspberry Pi
KRUPS-FemtoSat
krups
29.2 × 71.9 mm32 parts4LNo license0
The PICO_2_W in open source designs
The gallery holds 5 open source boards using the PICO_2_W from 3 GitHub repositories; a typical one measures about 87.6 × 64.4 mm and carries around 32 components.
60% use four copper layers or more, and 20% carry an open source license.
The most starred is Default by pete529.
Microcontrollers on boards using the PICO_2_W
What boards using the PICO_2_W are built for
PICO_2_W: common questions
Where can I find a PICO_2_W reference design?
Each of the 5 boards on this page is a real design using the PICO_2_W. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the PICO_2_W use?
Most are built on Raspberry Pi (3) and RP2040/RP2350 (2).
How big is a typical board using the PICO_2_W?
The median is 87.6 × 64.4 mm, and 40% are two-layer designs.
What is the most popular open source board using the PICO_2_W?
By GitHub stars, Default by pete529, with 4 stars.
Can I simulate one of these boards using the PICO_2_W before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.