CELL Z SPECT hardware
About the CELL Z SPECT hardware PCB
CELL Z SPECT hardware is an open source STM32 PCB design by Pgr18, published on GitHub. It is a 4-layer board measuring 193 × 105.2 mm, with 278 components from 97 distinct parts.
Its main chip is the STM32F407ZETx, from the STM32 family. Other key parts include the AD5141BCPZ100-RL7, OPA189ID, LT6372HMSE-1#PBF, MAX4526CSA+ and TPS7A3001DGNR. By type, the board carries 161 capacitors, 37 resistors, 28 ICs, 20 diodes, 7 connectors and 6 inductors.
From the project
Печатные платы для проекта клеточной импедансной спектроскопии
Main components on the CELL Z SPECT hardware
AD5141BCPZ100-RL7OPA189IDLT6372HMSE-1#PBFMAX4526CSA+TPS7A3001DGNRTPS7A4901DGNRTPS72325DBVRADP150AUJZ-2.5-R7USB3300-EZK-TRSTMPS2151MTRSTM32F407ZETxMDD01N-12A1215S-1WR3B1212LS-1WR3L7905L7805AMS1117-3.3USBLC6-2SC6STM32F103C8TxTPC5160-VS2R
CELL Z SPECT hardware bill of materials (BOM)
278 components, 97 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AD5141BCPZ100-RL7 | QFN50P300X300X80-17N-D | IC1 |
| 4 | OPA189ID | SOIC127P600X175-8N | IC2, IC3, IC4, IC5 |
| 1 | LT6372HMSE-1#PBF | SOP50P490X110-17N | IC6 |
| 4 | MAX4526CSA+ MAX4526EUA+ | SOIC127P600X175-8N | IC7, IC8, IC9, IC10 |
| 1 | TPS7A3001DGNR | SOP65P490X110-9N | IC11 |
| 1 | TPS7A4901DGNR | SOP65P490X110-9N | IC12 |
| 1 | TPS72325DBVR | SOT95P280X145-5N | IC13 |
| 1 | ADP150AUJZ-2.5-R7 | SOT95P280X100-5N | IC14 |
| 1 | ADP150AUJZ-2.5-R7 ADP150AUJZ-3.3-R7 | SOT95P280X100-5N | IC15 |
| 1 | USB3300-EZK-TR | QFN50P500X500X100-33N-D | IC16 |
| 1 | STMPS2151MTR | SOIC127P600X175-8N | IC17 |
| 1 | STM32F407ZETx | LQFP-144_20x20mm_P0.5mm | U1 |
| 1 | MDD01N-12 | CONV_PEM2-S12-D12-S | U2 |
| 1 | A1215S-1WR3 | CONV_PDM2-S24-D3-S | U3 |
| 1 | B1212LS-1WR3 | CONV_PCN1-S5-S15-S | U4 |
| 1 | L7905 | TO-263-2 | U5 |
| 1 | L7805 | TO-263-2 | U6 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U7 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U8 |
| 1 | STM32F103C8Tx | LQFP-48_7x7mm_P0.5mm | U10 |
Show 77 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | TPC5160-VS2R | VS2MSOP-10-A_TPK | U11, U12 |
| 1 | BT137S-600 | TO-252-2 | Q1 |
| 1 | Crystal_GND24 | Crystal_SMD_SeikoEpson_FA238-4Pin_3.2x2.5mm | Y1 |
| 2 | NX3225GD-8MHz | NX3225GD | Y2, Y3 |
| 1 | X321532768KJD2SI-32.768 | Crystal_SMD_3215-2Pin_3.2x1.5mm | Y4 |
| 1 | Conn_2Rows-17Pins | PinHeader_2x08_P2.54mm_Horizontal | J1 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4110 | J2 |
| 1 | DS-201 | DS201b | J3 |
| 2 | DEBUG_01x04 | PinHeader_1x04_P2.54mm_Vertical | J4, J13 |
| 1 | Conn_01x07 | PinHeader_1x07_P2.54mm_Vertical | J5 |
| 1 | TO_SWITCH | Samtec_HPM-02-01-x-S_Straight_1x02_Pitch5.08mm | J14 |
| 2 | TPA1286U | MSOP-8_3x3mm_P0.65mm | DA1, DA2 |
| 4 | RS3112XK-2.5 | SOIC-8_3.9x4.9mm_P1.27mm | DA3, DA4, DA5, DA6 |
| 2 | MS8551S/AD8628 | SOT-23-5 | DA9, DA10 |
| 1 | Fuse | Fuseholder_Cylinder-5x20mm_Stelvio-Kontek_PTF78_Horizontal_Open | F1 |
| 1 | FSMD050-30-R | Fuse_1812_4532Metric_Pad1.30x3.40mm_HandSolder | F2 |
| 1 | CPFC805NP-100M05 | CPFC805 | FL1 |
| 2 | KLS7-TS6606-13.0 | SW_PUSH_6mm_H4.3mm | SW1, SW2 |
| 1 | PMLL4148L | D_MiniMELF | TH1 |
| 2 | BZX84C13 | SOT-23 | D1, D2 |
| 1 | CA-IS3730LW | SOIC-16W_7.5x10.3mm_P1.27mm | D5 |
| 2 | CA-IS3741LW | SOIC-16W_7.5x10.3mm_P1.27mm | D6, D8 |
| 1 | CA-IS3761LW | SOIC-16W_7.5x10.3mm_P1.27mm | D7 |
| 1 | CA-IS3740LW | SOIC-16W_7.5x10.3mm_P1.27mm | D9 |
| 1 | SMAJ13CA | D_SMA | D10 |
| 5 | FYLS-0603UGC | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D11, D14, D16, D18, D20 |
| 3 | NSI45020T1G | SOD3716X135N | D12, D13, D15 |
| 2 | FYLS-0603URC | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D17, D19 |
| 2 | BAT43W | D_SOD-123 | D21, D22 |
| 3 | BLM18PG330SN1D | L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | FB1, FB2, FB3 |
| 3 | LQH66SN6R8M03L | IND_LQH66SN6R8M03L | L1, L2, L3 |
| 2 | 4.7uF/50V | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 7 | 1uF/10V | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4, C5, C12, C46, C47, C48 |
| 22 | 10uF/35V | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6, C9, C10, C31, C32, C35, C36, C38 +14 |
| 22 | 1uF/35V | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7, C8, C11, C13, C30, C33, C34, C37 +14 |
| 2 | 10uF/25V | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C14, C15 |
| 16 | 0.1uF/6.3V | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C16, C18, C20, C24, C26, C53, C78, C79 +8 |
| 5 | 10uF/6.3V | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C17, C19, C21, C25, C27 |
| 1 | 0.1uF/10V | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C22 |
| 1 | 10uF/10V | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C23 |
| 2 | 10pF(TBD)/25V | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C28, C29 |
| 4 | 1nF/35V | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C58, C59, C60, C62 |
| 10 | 1uF/6.3V | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C80, C81, C82, C83, C84, C85, C86, C87 +2 |
| 1 | 100n/50V | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C90 |
| 1 | 100uF/50V | CP_Radial_D8.0mm_P3.50mm | C91 |
| 2 | 1uF/50V | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C92, C93 |
| 7 | 2.2uF/50V | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C94, C95, C96, C97, C109, C114, C120 |
| 3 | 470nF/50V | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C98, C99, C100 |
| 4 | 10uF/50V | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C101, C104, C106, C108 |
| 6 | 10nF/50V | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C102, C103, C105, C107, C112, C122 |
| 9 | 2.2uF/10V | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C110, C111, C113, C115, C116, C117, C118, C119 +1 |
| 2 | 8pF/50V | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C130, C132 |
| 22 | 100n/6.3V | C_0402_1005Metric | C133, C139, C140, C141, C142, C143, C144, C145 +14 |
| 4 | 8p/50V | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C134, C135, C162, C163 |
| 2 | 2.2u/6.3V | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C136, C137 |
| 2 | 4.7u/6.3V | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C153, C155 |
| 2 | 7p/50V | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C164, C165 |
| 2 | 11k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R23 |
| 1 | TBD | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 2 | 1k/0.1% | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R11 |
| 2 | 160k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5 |
| 7 | 100k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R7, R8, R9, R10, R20, R35 |
| 3 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12, R13, R14 |
| 1 | 30k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R15 |
| 1 | 3.6k 0.1% | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R16 |
| 4 | 680 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R17, R21, R36, R37 |
| 2 | 910Ом/0.1% | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R18, R19 |
| 1 | 120k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R22 |
| 1 | 110k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R24 |
| 1 | 820 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R25 |
| 2 | 1M | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R26, R32 |
| 2 | 5.1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R27, R28 |
| 1 | 1.5k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R29 |
| 1 | 12k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R30 |
| 1 | 100k | R_0603_1608Metric | R31 |
| 1 | 10k | R_Array_Convex_4x0603 | RN1 |
| 1 | 10k/DNI | R_Array_Convex_4x0603 | RN2 |
CELL Z SPECT hardware design files
The KiCad project lives in the Pgr18/CELL_Z_SPECT_hardware repository on GitHub; these links point at the commit this page was built from.
- LayoutAFE_V3/AFE_V3.kicad_pcb
- SchematicAFE_V3/AFE_V3.kicad_sch
CELL Z SPECT hardware: common questions
What microcontroller does the CELL Z SPECT hardware use?
The CELL Z SPECT hardware is built around the STM32F407ZETx, from the STM32 family.
How big is the CELL Z SPECT hardware PCB?
The CELL Z SPECT hardware measures 193 × 105.2 mm, has 4 copper layers and is 1.5 mm thick.
How many components are on the CELL Z SPECT hardware?
278 components, from 97 distinct parts. The full bill of materials is listed on this page.
Where can I download the CELL Z SPECT hardware design files?
From the Pgr18/CELL_Z_SPECT_hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the CELL Z SPECT hardware design in my own project?
The repository has no license, so all rights stay with Pgr18. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the CELL Z SPECT hardware without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7k
STM32Type c
google
188 × 30 mm17 parts2LApache-2.02.9k
STM32Main panel
234 × 84 mm26 parts4LApache-2.02.9k
STM32Base
52.3 × 52.3 mm36 parts2LApache-2.02.9k
STM32Type a
150 × 30 mm14 parts2LApache-2.02.9k
STM32Type e
140.5 × 30 mm13 parts2LApache-2.02.9k