16 open source boards using the TPS7A4901DGNR
Real designs built with the TPS7A4901DGNR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Audio mixer
21bsirota
173.5 × 187.5 mm788 parts4LNo license0ESP32
Magnetometer node mainboard
Benjamin-girard-1
193 × 110 mm297 parts2LNo license0STM32
CELL Z SPECT hardware
Pgr18
193 × 105.2 mm278 parts4LNo license0Raspberry Pi
Default
jackalkahwati
1500 × 290 mm180 parts2LNo license0AVR/Arduino
Slice THMX
feastorg
100.1 × 144.9 mm117 parts4LGPL-3.00AVR/Arduino
Slice LEPD
feastorg
70 × 100 mm117 parts2LGPL-3.00Slice FPSG
feastorg
100.1 × 100 mm100 parts4LGPL-3.00AVR/Arduino
BREAD Slice
feastorg
70 × 100 mm35 parts2LGPL-3.00- schematic only · 278 parts
Dc cv interface
jounih
278 partsMIT0 ESP32
Geophys mainboard
Benjamin-girard-1
190 × 110 mm272 parts4LNo license0Raspberry Pi
Rev a cleanup
jackalkahwati
200 × 175 mm179 parts4LNo license0ESP32
Untitled
Benjamin-girard-1
190 × 110 mm269 parts4LNo license0Raspberry Pi
Rev a routed
jackalkahwati
200 × 175 mm179 parts4LNo license0Project ATO / Power
pratham-cloud-ctrl
175 × 185 mm156 parts4LCustom license0ESP32
Digital test board
Benjamin-girard-1
193 × 110 mm254 parts4LNo license0ESP32
Mainboard v2
Benjamin-girard-1
190 × 110 mm244 parts4LNo license0
How designs wire the TPS7A4901DGNR
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the TPS7A4901DGNR connects to, and the resistors, capacitors and other passives placed on it.
- The FB pin has a resistor to GND on 7 of 9 designs, most often 100 kΩ (then 99 Ω).
- The NR/SS pin has a capacitor to GND on 7 of 9 designs, most often 10 nF (then 1 µF).
- The FB pin has a capacitor to the supply on 6 of 9 designs, most often 10 nF.
- The EN pin is tied to 12V on 7 of 9 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| OUTpin 1 | Connected to: 5V 67% · a signal 33% | — |
| FBpin 2 | Connected to: Signal 100% |
|
| GNDpin 4 | Connected to: GND 78% · a signal 22% | — |
| ENpin 5 | Connected to: 12V 78% · a signal 22% | — |
| NR/SSpin 6 | Connected to: Signal 100% |
|
| DNCpin 7 | Connected to: Not connected 100% | — |
| INpin 8 | Connected to: 12V 78% · a signal 22% | — |
| EPADpin EPAD | Connected to: GND 100% | — |
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Audio mixer by 21bsirota, Digital test board by Benjamin-girard-1, Slice FPSG by feastorg and Slice LEPD by feastorg.
The TPS7A4901DGNR in open source designs
The gallery holds 16 open source boards using the TPS7A4901DGNR from 10 GitHub repositories; a typical one measures about 190 × 110 mm and carries around 212 components.
73% use four copper layers or more, and 31% carry an open source license.
The most starred is Audio mixer by 21bsirota.
Parts used alongside the TPS7A4901DGNR
Microcontrollers on boards using the TPS7A4901DGNR
What boards using the TPS7A4901DGNR are built for
TPS7A4901DGNR: common questions
Where can I find a TPS7A4901DGNR reference design?
Each of the 16 boards on this page is a real design using the TPS7A4901DGNR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the TPS7A4901DGNR FB pin?
The FB pin has a resistor to GND on 7 of 9 designs, most often 100 kΩ (then 99 Ω). Counted from the KiCad layouts of 9 open source designs using the TPS7A4901DGNR.
How is the TPS7A4901DGNR NR/SS pin connected?
The NR/SS pin has a capacitor to GND on 7 of 9 designs, most often 10 nF (then 1 µF). Counted from the KiCad layouts of 9 open source designs using the TPS7A4901DGNR.
How is the TPS7A4901DGNR EN pin connected?
The EN pin is tied to 12V on 7 of 9 designs (a signal on 2). Counted from the KiCad layouts of 9 open source designs using the TPS7A4901DGNR.
What parts are used alongside the TPS7A4901DGNR?
The AP63205, TPS7A3001DGNR, Arduino_Nano_v3.x, AMS1117-3.3 and TPS54331DR appear in the most repositories here.
Which microcontrollers do boards using the TPS7A4901DGNR use?
Most are built on ESP32 (6), AVR/Arduino (3), Raspberry Pi (3) and STM32 (1).
How big is a typical board using the TPS7A4901DGNR?
The median is 190 × 110 mm, and 27% are two-layer designs.
What is the most popular open source board using the TPS7A4901DGNR?
By GitHub stars, Audio mixer by 21bsirota, with 0 stars.
Can I simulate one of these boards using the TPS7A4901DGNR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.