27 open source boards using the L7905
Real designs built with the L7905, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
Analog board
EERNINUO
125 × 90 mm281 parts4LGPL-3.036AVR/Arduino
Sgikbd
jtsiomb
80 × 60 mm27 parts2LGPL-3.020RP2040/RP2350
AWG
F6ITU
140 × 75 mm73 parts2LNo license14A2000-ATX-PSU-Adapter
wiretap-retro
69.1 × 37.5 mm9 parts4LNo license9AdamPicoPSU
aotta
80.9 × 39.5 mm11 parts2LNo license6MetaphoricV2
OldWer
204.5 × 138 mm140 parts2LCC0-1.05Potenciostato
potenciostato
100 × 100 mm57 parts2LGPL-3.03AVR/Arduino
Lisa-Twiggy-Breakout-Board
DosFox1
198.1 × 50.8 mm32 parts2LGPL-3.02EasyATnoX
chris-kwng
99.5 × 99.5 mm24 parts2LCC-BY-SA-4.02PSU linear reg
matterwaves
100 × 40 mm24 parts2LNo license1STM32
SplitBoard8Voice
hsetlik
310 × 199 mm517 parts4LNo license0STM32
CELL Z SPECT hardware
Pgr18
193 × 105.2 mm278 parts4LNo license0AVR/Arduino
AmplifierBoard
dangrie158
210 × 104 mm225 parts2LMIT0Snark barker mini
computerguy096
103.7 × 78.5 mm175 parts4LCC-BY-SA-4.00Usbpd adapter
fachat
108.5 × 69.9 mm128 parts2LNo license0ExpansionBoardPCA6151
glitchineering
185.4 × 82.6 mm59 parts2LGPL-3.003APSU
codesqueak
178 × 127 mm45 parts2LCERN-OHL-S-2.00- schematic only · 134 parts
STM DrumMachine
hsetlik
134 partsNo license0 Usbpd adapter
fachat
61.3 × 45.5 mm49 parts2LNo license4Potenciostato simple faz
potenciostato
100 × 100 mm56 parts2LGPL-3.03STM32
LowerBoard1v2
hsetlik
310 × 110 mm284 parts4LNo license0Psu linear reg
jc-roth
100 × 40 mm18 parts2LNo license0Fonte tensao LM675 v05b
Pinheirogustavo
90 × 100 mm40 parts2LNo license2STM32
Waveform Generator
Synthron
160 × 100 mm105 parts2LNo license3High Voltage Arc Detector
akbar-q
118.2 × 53.2 mm53 parts4LNo license0GIMIX Ghost 6800
roberto314
228.6 × 142.2 mm74 parts2LBSD-2-Clause1LFO
theWickedWebDev
30 × 100.8 mm32 parts2LNo license0
How designs wire the L7905
Read from the KiCad layouts of 24 open source designs, one per repository: what each pin of the L7905 connects to, and the resistors, capacitors and other passives placed on it.
- The VI pin has a decoupling capacitor on 11 of 24 designs, most often 100 nF (then 2.2 µF).
- The VO pin has a decoupling capacitor on 10 of 24 designs, most often 100 nF (then 2.2 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 88% | — |
| VIpin 2 | Connected to: -12V 71% · a signal 25% |
|
| VOpin 3 | Connected to: -5V 71% · a signal 25% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Analog board by EERNINUO, Sgikbd by jtsiomb, AWG by F6ITU and A2000-ATX-PSU-Adapter by wiretap-retro.
The L7905 in open source designs
The gallery holds 27 open source boards using the L7905 from 25 GitHub repositories; a typical one measures about 113.3 × 94.8 mm and carries around 57 components.
73% are two-layer designs, the rest use four layers or more, and 44% carry an open source license.
The most starred is Analog board by EERNINUO.
Parts used alongside the L7905
Microcontrollers on boards using the L7905
What boards using the L7905 are built for
L7905: common questions
Where can I find a L7905 reference design?
Each of the 27 boards on this page is a real design using the L7905. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the L7905 VI pin?
The VI pin has a decoupling capacitor on 11 of 24 designs, most often 100 nF (then 2.2 µF). Counted from the KiCad layouts of 24 open source designs using the L7905.
What decoupling capacitors do designs use on the L7905 VO pin?
The VO pin has a decoupling capacitor on 10 of 24 designs, most often 100 nF (then 2.2 µF). Counted from the KiCad layouts of 24 open source designs using the L7905.
What parts are used alongside the L7905?
The L7805, L7812, L7912, 74HC14 and LM358 appear in the most repositories here.
Which microcontrollers do boards using the L7905 use?
Most are built on STM32 (4), AVR/Arduino (3), FPGA (1) and RP2040/RP2350 (1).
How big is a typical board using the L7905?
The median is 113.3 × 94.8 mm, and 73% are two-layer designs.
What is the most popular open source board using the L7905?
By GitHub stars, Analog board by EERNINUO, with 36 stars.
Can I simulate one of these boards using the L7905 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.