3 open source boards using the STM32F407ZETx

Real designs built with the STM32F407ZETx, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The STM32F407ZETx in open source designs

The gallery holds 3 open source boards using the STM32F407ZETx from 3 GitHub repositories; a typical one measures about 185 × 105.2 mm and carries around 278 components.

67% use four copper layers or more, and 33% carry an open source license.

The most starred is Corevus g by calithameridi.

Parts used alongside the STM32F407ZETx

Microcontrollers on boards using the STM32F407ZETx

What boards using the STM32F407ZETx are built for

STM32F407ZETx: common questions

Where can I find a STM32F407ZETx reference design?

Each of the 3 boards on this page is a real design using the STM32F407ZETx. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the STM32F407ZETx use?

Most are built on STM32 (3).

How big is a typical board using the STM32F407ZETx?

The median is 185 × 105.2 mm, and 33% are two-layer designs.

What is the most popular open source board using the STM32F407ZETx?

By GitHub stars, Corevus g by calithameridi, with 25 stars.

Can I simulate one of these boards using the STM32F407ZETx before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part