Esp32-ble sensor

philipcristiano·hvac-iot·esp32-ble-sensor-mini/esp32-ble-sensor.kicad_pcb

Esp32-ble sensor PCB layout, top view — open source ESP32 board by philipcristiano

About the Esp32-ble sensor PCB

Esp32-ble sensor is an open source ESP32 PCB design by philipcristiano, published on GitHub. It is a 2-layer board measuring 27.5 × 89 mm, with 29 components from 18 distinct parts.

Its main chip is the ESP32-C6-MINI-1/U, from the ESP32 family. Other key parts include the SHT4x, TPD4E05U06DQA, TLV75533PDYDR and LM66200DRLR. By type, the board carries 9 capacitors, 8 resistors, 5 ICs, 3 connectors, 2 switches and 1 battery holder.

It belongs with the iot & wireless and sensors designs in this gallery.

From the project

IoT system for HVAC control

See .github/workflows/ArduinoSensor.yml` for the most up to date steps

Main components on the Esp32-ble sensor

Esp32-ble sensor bill of materials (BOM)

29 components, 18 distinct parts.

QtyPartRefs
1
ESP32-C6-MINI-1/U
U1
1
SHT4x
U2
1
TPD4E05U06DQA
U3
1
TLV75533PDYDR
U5
1
LM66200DRLR
U6
1
Qwiic_RA
J2
1
Conn_01x05
J3
1
USB4215-03-A_REVA
J4
1
Battery
BT1
2
SW_SPST
SW1, SW2
1
WS2812B
D1
2
100nF
C1, C10
5
2.2uF
C3, C4, C7, C8, C11
1
10uF
C5
1
1uF
C6
2
5.1k
R1, R2
4
10k
R3, R4, R5, R6
2
1M
R8, R9

Esp32-ble sensor design files

The KiCad project lives in the philipcristiano/hvac-iot repository on GitHub; these links point at the commit this page was built from.

Esp32-ble sensor: common questions

What microcontroller does the Esp32-ble sensor use?

The Esp32-ble sensor is built around the ESP32-C6-MINI-1/U, from the ESP32 family.

How big is the Esp32-ble sensor PCB?

The Esp32-ble sensor measures 27.5 × 89 mm, has 2 copper layers and is 1.6256 mm thick.

How many components are on the Esp32-ble sensor?

29 components, from 18 distinct parts. The full bill of materials is listed on this page.

Where can I download the Esp32-ble sensor design files?

From the philipcristiano/hvac-iot repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Esp32-ble sensor design in my own project?

The repository has no license, so all rights stay with philipcristiano. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Esp32-ble sensor without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in hvac-iot

Similar boards