Powerbank

philipiak123·powerbank·hardware/pcb/powerbank.kicad_pcb

Powerbank PCB layout, top view — open source board by philipiak123

About the Powerbank PCB

Powerbank is an open source PCB design by philipiak123, published on GitHub. It is a 2-layer board measuring 91 × 108.5 mm, with 27 components from 19 distinct parts.

Other key parts include the TP4057, MT3608 and DW01A. By type, the board carries 7 capacitors, 7 resistors, 5 diodes, 3 ICs, 2 connectors and 1 transistor.

It belongs with the power & battery designs in this gallery.

From the project

This project is a single-cell (1S) lithium-ion powerbank designed for 3.7V Li-Ion batteries (4.2V fully charged).

This project is a single-cell (1S) lithium-ion powerbank designed for 3.7V Li-Ion batteries (4.2V fully charged).

Li-Ion linear charging circuit (TP4056) Battery Management System (BMS) for protection PCB designed in KiCad Local symbol and footprint libraries included in repository

The design is intended for educational use, prototyping, and small-scale DIY applications.

Main components on the Powerbank

Powerbank bill of materials (BOM)

27 components, 19 distinct parts.

QtyPartRefs
1
TP4057
U1
1
MT3608
U2
1
DW01A
U3
1
FS8205A
Q1
1
USB_C_Receptacle_PowerOnly_6P
J1
1
USB_A
J2
1
Battery_Cell
BT1
5
SS34
D1, D2, D3, D4, D5
1
22μH
L1
1
100 nF
C1
2
22μF
C2, C3
3
10μF
C4, C6, C7
1
1 nF
C5
1
2.4 kΩ
R1
1
2.2
R3
2
5.1 k
R4, R5
1
22 kΩ
R6
1
3 kΩ
R7
1
1 MΩ
R8

Powerbank design files

The KiCad project lives in the philipiak123/powerbank repository on GitHub; these links point at the commit this page was built from.

Powerbank: common questions

How big is the Powerbank PCB?

The Powerbank measures 91 × 108.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Powerbank?

27 components, from 19 distinct parts. The full bill of materials is listed on this page.

Where can I download the Powerbank design files?

From the philipiak123/powerbank repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Powerbank design in my own project?

The repository has no license, so all rights stay with philipiak123. Use it as a reference, and ask the author before reusing the design.

Similar boards