AllSerial FTDI master

Phunkafizer·AllSerial·Mainboards/USB FTDI/Board/FTDI master.kicad_pcb

AllSerial FTDI master PCB layout, top view — open source board by Phunkafizer

About the AllSerial FTDI master PCB

AllSerial FTDI master is an open source PCB design by Phunkafizer, published on GitHub under the MIT license. It is a 2-layer board measuring 67.4 × 54.3 mm, with 60 components from 36 distinct parts.

Other key parts include the NCP1117ST, MCP1700T-1802E, CRE1S0505SC, IRF7416 and TPS61041. By type, the board carries 21 capacitors, 16 resistors, 9 ICs, 4 LEDs, 3 crystals and 2 diodes.

It belongs with the usb & debug tools and iot & wireless designs in this gallery.

From the project

An universal sophisticated USB-serial converter

SEE PROJECTHOMEPAGE UNDER https://www.seegel-systeme.de/2025/07/10/allserial

Over the course of time I had to work with many different devices which had to be connected via a kind of serial interface. There are lots of different cheap USB-serial adapters available, but no adapter was including all features I needed in a single device. Every USB-serial adapter has in common the USB Controller. So I came up with the idea having a masterboard providing all the common features like USB interface, isolation and diagnostic elements. The most used interfaces (RS232, RS485, TTL UART, TTY current…

AllSerial FTDI master, from the project README — From the project README

Main components on the AllSerial FTDI master

NCP1117STMCP1700T-1802E CRE1S0505SCIRF7416TPS61041ADuM142E0BRQZ-RL7FT232RL

AllSerial FTDI master bill of materials (BOM)

60 components, 36 distinct parts.

Qty	Part	Footprint	Refs
1	NCP1117ST	SOT-223-3_TabPin2	IC1
1	MCP1700T-1802E	SOT-23	IC2
1	CRE1S0505SC	MURATA-SC	IC3
1	IRF7416	SOIC-8_3.9x4.9mm_P1.27mm	IC5
1	TPS61041	SOT-23-5_HandSoldering	IC6
3	ADuM142E0BRQZ-RL7	QSOP-16_3.9x4.9mm_P0.635mm	IC7, IC8, IC9
1	FT232RL	SSOP-28_5.3x10.2mm_P0.65mm	IC10
1	~	Mentor 1296.1004	M1
1	AKL18X-04W	Metz_PT11304HBBN_182	X2
1	IDC-Header_2x05_P2.54mm_Vertical	IDC-Header_2x05_P2.54mm_Vertical	X3
1	ALLSERIALMASTERM	MasterBoard	X4
1	USB_C_Receptacle_USB2.0	USB_C_Receptacle_G-Switch_GT-USB-7010ASV	J1
1	31-XX	SW_SPST_Omron_B3F-315x_Angled	S1
1	PWR	LED_0603_1608Metric	LED1
1	RX	LED_0603_1608Metric	LED2
1	TX	LED_0603_1608Metric	LED3
1	TXEN	LED_0603_1608Metric	LED4
1	USBLC6-2	SOT-23-6	D1
1	MBR0530	D_SOD-123	D2
1	10µ	L_1210_3225Metric	L1

Show 16 more

Qty	Part	Footprint	Refs
1	~	L_0805_2012Metric	L10
3	10n	C_0805_2012Metric	C1, C4, C11
9	100n	C_0603_1608Metric	C2, C5, C7, C8, C15, C16, C17, C18 +1
3	10µ	C_0805_2012Metric	C3, C13, C21
2	4µ7	C_0805_2012Metric	C6, C14
2	1µ	C_0805_2012Metric	C9, C10
1	100µ	CP_Elec_5x5.9	C12
1	22pF	C_0805_2012Metric	C20
1	1k	R_0805_2012Metric	R1
1	10k	R_0805_2012Metric	R2
4	270	R_0805_2012Metric	R3, R4, R8, R9
1	1M	R_0805_2012Metric	R5
5	22k	R_0805_2012Metric	R6, R7, R10, R11, R12
2	5k1	R_0805_2012Metric	R13, R14
1	300k	R_0805_2012Metric	R15
1	33k	R_0805_2012Metric	R16

AllSerial FTDI master design files

The KiCad project lives in the Phunkafizer/AllSerial repository on GitHub; these links point at the commit this page was built from.

AllSerial FTDI master: common questions

How big is the AllSerial FTDI master PCB?

The AllSerial FTDI master measures 67.4 × 54.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the AllSerial FTDI master?

60 components, from 36 distinct parts. The full bill of materials is listed on this page.

Where can I download the AllSerial FTDI master design files?

From the Phunkafizer/AllSerial repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the AllSerial FTDI master design in my own project?

Yes, under the terms of its MIT license, which Phunkafizer chose for the repository.

More boards in AllSerial

Similar boards