3 open source boards using the MCP1700T-1802E
Real designs built with the MCP1700T-1802E, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
GPS Mezzanine
96boards
85 × 54 mm32 parts2LNo license3296boards robomezzi
mwelling
85 × 54 mm112 parts4LCC-BY-SA-4.06AllSerial FTDI master
Phunkafizer
67.4 × 54.3 mm60 parts2LMIT5
The MCP1700T-1802E in open source designs
The gallery holds 3 open source boards using the MCP1700T-1802E from 3 GitHub repositories; a typical one measures about 85 × 54 mm and carries around 60 components.
67% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.
The most starred is GPS Mezzanine by 96boards.
Parts used alongside the MCP1700T-1802E
What boards using the MCP1700T-1802E are built for
MCP1700T-1802E: common questions
Where can I find a MCP1700T-1802E reference design?
Each of the 3 boards on this page is a real design using the MCP1700T-1802E. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How big is a typical board using the MCP1700T-1802E?
The median is 85 × 54 mm, and 67% are two-layer designs.
What is the most popular open source board using the MCP1700T-1802E?
By GitHub stars, GPS Mezzanine by 96boards, with 32 stars.
Can I simulate one of these boards using the MCP1700T-1802E before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.