Liger v0.2

physiii·access-controller·circuits/strike/strike-controller.kicad_pcb

Liger v0.2 PCB layout, top view — open source ESP32 board by physiii

About the Liger v0.2 PCB

Liger v0.2 is an open source ESP32 PCB design by physiii, published on GitHub. It is a 4-layer board measuring 36 × 63 mm, with 84 components from 32 distinct parts.

Its main chip is the ESP32-WROOM-32, from the ESP32 family. Other key parts include the PYQ2898, AMS1117-3.3, MT2492 and CH340T. By type, the board carries 30 resistors, 15 transistors, 12 capacitors, 10 diodes, 9 connectors and 5 ICs.

It belongs with the iot & wireless designs in this gallery.

From the project

ESP32-S3 firmware, web controls and hardware for a two-channel strike/magnetic lock controller. Wiegand readers, keypads, exit buttons, fobs and motion inputs feed the same authorization and lock-control services.

ESP32-S3 firmware, web controls and hardware for a two-channel strike/magnetic lock controller. Wiegand readers, keypads, exit buttons, fobs and motion inputs feed the same authorization and lock-control services.

Use the configured ESP-IDF checkout and espwebsocketclient component. The current firmware targets ESP32-S3; building does not flash a controller.

The browser check uses intercepted fixtures and cannot operate a real lock. It covers desktop/mobile navigation, AP/STA links and recovery after saving Wi-Fi settings. Omit CHROMIUMPATH` to use Playwright's installed Chromium.

Main components on the Liger v0.2

Liger v0.2 bill of materials (BOM)

84 components, 32 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-WROOM-32
U1
1
PYQ2898
PIR-DIGITAL
U2
1
AMS1117-3.3
REG_AMS1117-3.3
U3
1
MT2492
REG_MT2492
U4
1
CH340T
CH340T(SSOP20W)
U5
1
X322512MSB4SI
Crystal_12Mhz
Q1
1
SS8050
Q_SS8050
Q2
1
SS8550
Q_SS8550
Q3
12
MMBT5551
Q_MMBT5551
Q4, Q5, Q6, Q7, Q8, Q9, Q10, Q11 +4
1
0548190519
USB_MINI_B
J2
4
533980671
Molex_Blade_6pin
J3, J4, J5, J6
4
CONN_01X01_FEMALE
Conn_01x01_Female
J7, J8, J9, J10
2
TS-1187A-B-A-B
SW_PUSH_SM
EN1, PROG1
2
19-217/BHC-ZL1M2RY/3T
LED_G
D1, D2
1
LBAT54CLT1G
BAT54C
D3
1
19-217/BHC-ZL1M2RY/3T
LED_G
D4
5
SM4007PL
D_SM4007PL
D5, D6, D7, D8, D9
1
WS2812B
D10
1
WPN4020H100MT
10uH
L1
1
CL10A106MA8NRNC
C_10uF
C1
Show 12 more
QtyPartRefs
2
CL05A105KA5NQNC
C_1uF
C2, C3
2
0402CG270J500NTN
C_27pF_0402
C4, C5
2
CL10A226MQ8NRNC
C_22uF
C6, C12
1
CL05B104KO5NNNC
C_100nF_0402
C7
3
CL21A106KAYNNNE
C_10uF
C8, C9, C10
1
0402B223K500NT
22nF
C11
5
0402WGF1002TCE
R_10K_0402
R1, R2, R4, R5, R26
17
0402WGF1001TCE
R_1K_0402
R3, R6, R7, R11, R12, R14, R15, R16 +9
1
0402WGF2200TCE
R_220_0402
R8
1
0603WAF4992T5E
49.9K
R9
5
0402WGF1000TCE
R_100
R10, R13, R17, R20, R23
1
0402WGF1912TCE
19K
R25

Liger v0.2 design files

The KiCad project lives in the physiii/access-controller repository on GitHub; these links point at the commit this page was built from.

Liger v0.2: common questions

What microcontroller does the Liger v0.2 use?

The Liger v0.2 is built around the ESP32-WROOM-32, from the ESP32 family.

How big is the Liger v0.2 PCB?

The Liger v0.2 measures 36 × 63 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Liger v0.2?

84 components, from 32 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Liger v0.2 design files?

From the physiii/access-controller repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Liger v0.2 design in my own project?

The repository has no license, so all rights stay with physiii. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Liger v0.2 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in access-controller

Similar boards