Access controller

physiii·access-controller·circuits/controller/access-controller.kicad_pcb

Access controller PCB layout, top view — open source ESP32 board by physiii

About the Access controller PCB

Access controller is an open source ESP32 PCB design by physiii, published on GitHub. It is a 4-layer board measuring 150 × 90 mm, with 186 components from 54 distinct parts.

Its main chip is the MIC29302WU-TR, from the ESP32 family. Other key parts include the MCP23017-E/SO, AMS1117-3.3, TLP291-4(GB-TP,E(T, CP2102N-A02-GQFN28R and MIC29302WU. By type, the board carries 84 resistors, 34 diodes, 23 connectors, 16 capacitors, 14 transistors and 10 ICs.

It belongs with the iot & wireless designs in this gallery.

From the project

ESP32-S3 firmware, web controls and hardware for a two-channel strike/magnetic lock controller. Wiegand readers, keypads, exit buttons, fobs and motion inputs feed the same authorization and lock-control services.

ESP32-S3 firmware, web controls and hardware for a two-channel strike/magnetic lock controller. Wiegand readers, keypads, exit buttons, fobs and motion inputs feed the same authorization and lock-control services.

Use the configured ESP-IDF checkout and espwebsocketclient component. The current firmware targets ESP32-S3; building does not flash a controller.

The browser check uses intercepted fixtures and cannot operate a real lock. It covers desktop/mobile navigation, AP/STA links and recovery after saving Wi-Fi settings. Omit CHROMIUMPATH` to use Playwright's installed Chromium.

Main components on the Access controller

Access controller bill of materials (BOM)

186 components, 54 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MCP23017-E/SO
MCP23017_SS
U1
1
AMS1117-3.3
REG_AMS1117-3.3
U3
1
MIC29302WU-TR
MIC29302WU
U4
3
TLP291-4(GB-TP,E(T
TLP291-4
U5, U9, U10
1
CP2102N-A02-GQFN28R
CP2102N-Axx-xQFN28
U6
1
MIC29302WU
ESP32-S3-WROOM-1
U7
1
MT2492
REG_MT2492
U8
1
W5500
U12
1
L8050QLT1G
Q_L8050QLT1G
Q1
1
L8550HQLT1G
Q_L8550HQLT1G
Q2
10
MMBT5551
Q_MMBT5551
Q3, Q4, Q6, Q7, Q10, Q11, Q12, Q13 +2
2
AO3400A
Q_AO3400A
Q8, Q9
1
RJ45_JK0-0177NL
Conn_01x01_Female
J1
1
BARREL_JACK_OD5.5_ID2.5
Conn_01x01_Female
J2
1
TERMINAL_01X04
Conn_01x01_Female
J3
1
TERMINAL_01X03
Conn_01x01_Female
J4
1
DC-470-2.1GP
Barrel_Jack_Switch
J5
1
WJ2EDGRC-5.08-2P
Screw_Terminal_01x02
J6
4
WJ2EDGRC-5.08-4P
Terminal_01x04
J7, J11, J14, J18
6
WJ2EDGRC-5.08-3P
Terminal_01x03
J8, J9, J10, J15, J16, J17
Show 34 more
QtyPartRefs
2
WJ2EDGRC-5.08-5P
Screw_Terminal_01x05
J12, J19
1
X6521WVS-2x06H-C60D74
Conn_02x06_Odd_Even
J13
2
920-462A2021S10101
USB_MINI_B
J20, J21
1
CONN_01X01_FEMALE
RF_MODULE
J22
1
R-RJ45R08P-C000
CONN_RJ45
J23
3
K2-1102SP-C4SC-04
SW_PUSH
EN1, FACT1, PROG1
1
TMB12A05
LS1
1
SMBJ26CA
D_Zener
D1
21
KT-0603W
White
D2, D3, D4, D13, D18, D19, D20, D21 +13
2
1N5819HW-7-F
ESD_5V
D5, D7
1
ESD_5V
D6
2
1N5819HW-7-F
D_1N5819HW
D8, D10
3
D_B1100
ESD_5V
D9, D11, D12
4
KT-0603R
Red
D14, D15, D16, D17
1
WPN4020H100MT
10uH
L1
2
RVT1V471M1010
C_470uF
C1, C2
7
CL21A106KAYNNNE
C_10uF
C5, C6, C7, C10, C11, C14, C16
1
T491C106K025AT
C_10uF_Ta
C8
3
CL05A105KA5NQNC
1uF
C9, C12, C13
1
CL05B104KO5NNNC
100nF
C15
1
0402B223K500NT
22nF
C17
1
CL10A226MQ8NRNC
C_22uF
C18
33
0402WGF1002TCE
10K
R1, R2, R3, R4, R5, R8, R11, R20 +25
1
0402WGF1003TCE
100K
R6
1
0603WAF1302T5E
13K
R7
1
0402WGF2002TCE
R_20K
R9
1
0402WGF1002TCE
R_2.2K
R10
12
ERJ-3GEYJ102V
R_1K
R12, R13, R14, R15, R37, R38, R39, R40 +4
16
0402WGF1002TCE
R_10K_0402
R16, R17, R18, R19, R41, R42, R43, R44 +8
1
FRC0402F2212TS
22.1K
R25
1
0603WAF4752T5E
47.5K
R26
6
0402WGF1001TCE
1K
R27, R69, R70, R71, R72, R73
3
0402WGF1000TCE
R_100
R31, R59, R63
8
0402WGF1001TCE
R_1K_0402
R57, R58, R60, R61, R62, R64, R65, R66

Access controller design files

The KiCad project lives in the physiii/access-controller repository on GitHub; these links point at the commit this page was built from.

Access controller: common questions

What microcontroller does the Access controller use?

The Access controller is built around the MIC29302WU-TR, from the ESP32 family.

How big is the Access controller PCB?

The Access controller measures 150 × 90 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Access controller?

186 components, from 54 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Access controller design files?

From the physiii/access-controller repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Access controller design in my own project?

The repository has no license, so all rights stay with physiii. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Access controller without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in access-controller

Similar boards