Led controller

physiii·led-controller·circuits/led-controller.kicad_pcb

Led controller PCB layout, top view — open source ESP32 board by physiii

About the Led controller PCB

Led controller is an open source ESP32 PCB design by physiii, published on GitHub. It is a 4-layer board measuring 32 × 63 mm, with 55 components from 25 distinct parts.

Its main chip is the ESP-WROOM-32, from the ESP32 family. Other key parts include the SPH0645LM4H-B, PIR-DIGITAL, SI7020-A20, MAX98357AETE+T and MCP73831T. By type, the board carries 24 resistors, 9 capacitors, 7 ICs, 5 connectors, 5 diodes and 1 transistor.

It belongs with the audio and sensors designs in this gallery.

From the project

ESP32 Based LED Controller

Led controller, from the project README
From the project README

Main components on the Led controller

Led controller bill of materials (BOM)

55 components, 25 distinct parts.

QtyPartRefs
1
SPH0645LM4H-B
U1
1
PIR-DIGITAL
U2
1
ESP-WROOM-32
U3
1
SI7020-A20
U4
1
MAX98357AETE+T
U5
1
MCP73831T
U6
1
REG-3.3v
U11
1
PMOS-DMG3413L
Q4
2
Conn_02x02_Odd_Even
J1, J4
1
Conn_02x07_Odd_Even
J2
1
Conn_01x02
J3
1
CONN_01X03
P1
3
SW_PUSH
FACT1, PROG1, RESET1
1
Rotary_Encoder_Switch
SW1
3
LED_G
D1, D2, D3
1
LED-0603-G
D4
1
D_Schottky-BAT20JFILM
D6
4
C_0.1uF
C1, C2, C3, C6
1
C_10uF
C4
4
C_1uF
C5, C7, C8, C9
Show 5 more
QtyPartRefs
17
R_10K
R1, R2, R3, R4, R5, R6, R7, R8 +9
3
R_47.5
R9, R12, R14
1
R_1k
R10
2
R_100k
R11, R13
1
R_2k
R19

Led controller design files

The KiCad project lives in the physiii/led-controller repository on GitHub; these links point at the commit this page was built from.

Led controller: common questions

What microcontroller does the Led controller use?

The Led controller is built around the ESP-WROOM-32, from the ESP32 family.

How big is the Led controller PCB?

The Led controller measures 32 × 63 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Led controller?

55 components, from 25 distinct parts. The full bill of materials is listed on this page.

Where can I download the Led controller design files?

From the physiii/led-controller repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Led controller design in my own project?

The repository has no license, so all rights stay with physiii. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Led controller without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards