Wardriver

Pilot-572·Wardriver·PCB/Wardriver.kicad_pcb

Wardriver PCB layout, top view — open source ESP32 board by Pilot-572

About the Wardriver PCB

Wardriver is an open source ESP32 PCB design by Pilot-572, published on GitHub under the MIT license. It is a 2-layer board measuring 65 × 95 mm, with 40 components from 22 distinct parts.

Its main chip is the ESP32-S3-WROOM-1U-N16R8, from the ESP32 family. Other key parts include the CR2013-MI2120, TP4056_MICRO-USB_CHARGER_-_1A and AP2112K-3.3. By type, the board carries 11 resistors, 10 capacitors, 7 switches, 4 ICs, 4 diodes and 2 connectors.

It belongs with the iot & wireless, rf & radio and power & battery designs in this gallery.

From the project

Wardriver (the definition of a device scanning for wireless networks) but better! Featuring Wifi and Bluetooth scanning with a gps module, it's a great monitor as a small project (and as a Half-Life Hackclub project!!)

Hello yall! (My second README, have fun! <3) so this is a... wardriver! Well I like to call it a wi-fi/BLE scanner and monitor and I won't scan while from a moving vehicle but wardriver sounds cooler so yeah. # This is my second project which I actually did it all by myself (not unlike the software projects, let's not talk about those.)

This device scans wi-fi and bluetooth RFs and it also has GPS, and it uses the ESP32 Marauder (by justcallmekoko).

Wardriver, from the project README
From the project README

Main components on the Wardriver

Wardriver bill of materials (BOM)

40 components, 22 distinct parts.

QtyPartRefs
1
CR2013-MI2120
U1
1
ESP32-S3-WROOM-1U-N16R8
U2
1
TP4056_MICRO-USB_CHARGER_-_1A
U3
1
AP2112K-3.3
U4
1
AO3401A
Q1
1
GY-NEO-M8N
J1
1
USB_C_Receptacle_USB2.0_16P
J2
1
Battery
BT1
2
SW_Push
SW1, SW2
4
Switch
SW3, SW4, SW5, SW6
1
slide switch
SW7
1
SS34
D1
3
LED
D2, D3, D4
1
uF1
C1
4
100nF
C2, C4, C8, C10
2
22uF
C3, C5
2
10uF
C6, C7
1
10uF1
C9
3
10k
R1, R2, R3
3
330
R4, R5, R6
Show 2 more
QtyPartRefs
3
100k
R7, R8, R9
2
5.1k
R10, R11

Wardriver design files

The KiCad project lives in the Pilot-572/Wardriver repository on GitHub; these links point at the commit this page was built from.

Wardriver: common questions

What microcontroller does the Wardriver use?

The Wardriver is built around the ESP32-S3-WROOM-1U-N16R8, from the ESP32 family.

How big is the Wardriver PCB?

The Wardriver measures 65 × 95 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Wardriver?

40 components, from 22 distinct parts. The full bill of materials is listed on this page.

Where can I download the Wardriver design files?

From the Pilot-572/Wardriver repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Wardriver design in my own project?

Yes, under the terms of its MIT license, which Pilot-572 chose for the repository.

Can I test firmware for the Wardriver without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards