Flight-Computer

Pioneer-Rocketry·Flight-Computer·PCB/Flight Computer.kicad_pcb

Flight-Computer PCB layout, top view — open source STM32 board by Pioneer-Rocketry

About the Flight-Computer PCB

Flight-Computer is an open source STM32 PCB design by Pioneer-Rocketry, published on GitHub. It is a 6-layer board measuring 30 × 60 mm, with 100 components from 48 distinct parts.

Its main chip is the STM32F405RGTx, from the STM32 family. Other key parts include the LM1117MP-3.3, W25Q128JVS, SAM-M8Q, LSM6DSV320 and MMC5633NJL. By type, the board carries 34 capacitors, 28 resistors, 9 ICs, 7 inductors, 6 connectors and 6 diodes.

It belongs with the rf & radio and sensors designs in this gallery.

From the project

Pioneer Rocketry’s latest generation flight computer for high power, STM32-based avionics system designed for experimental high-power rockets. It provides state estimation, real-time telemetry, staging logic, and fully active control capabilities. This repository contains the fir

Pioneer Rocketry’s latest generation flight computer for high power, STM32-based avionics system designed for experimental high-power rockets. It provides state estimation, real-time telemetry, staging logic, and fully active control capabilities. This repository contains the firmware, test tools, and documentation for the system.

Before building this project, ensure you have the following tools installed and added to your system PATH:

Main components on the Flight-Computer

Flight-Computer bill of materials (BOM)

100 components, 48 distinct parts.

QtyPartRefs
1
LM1117MP-3.3
U101
1
STM32F405RGTx
U201
1
W25Q128JVS
U202
1
SAM-M8Q
U301
1
LSM6DSV320
U302
1
MMC5633NJL
U303
1
MS5607-02BA
U304
1
SX1262IMLTRT
U501
1
SKY13453-385LF
U502
1
FDN306P
Q101
4
SL2302S
Q401, Q601, Q602, Q603
1
Resonator
Y201
1
32 MHz
Y501
1
Conn_01x05_Pin
J401
1
USB_C_Receptacle_USB2.0_16P
J402
1
Screw_Terminal_01x06
J404
1
Screw_Terminal_01x04
J405
1
Conn_01x04
J408
1
Conn_Coaxial
J501
1
Buzzer
BZ401
Show 28 more
QtyPartRefs
2
SW_Push
SW401, SW402
2
LED
D101, D403
2
D
D401, D405
2
WS2812B-2020
D402, D404
1
15u
L501
1
68n
L502
1
33n
L503
1
3.9n
L504
1
15n
L505
2
0R
L506, L507
19
.1u
C101, C202, C203, C205, C206, C207, C209, C301 +11
1
4.7u
C201
2
2.2u
C204, C210
1
1u
C208
2
100p
C504, C512
1
470n
C505
1
22n
C506
2
3.3p
C507, C510
1
4.7p
C508
1
1p
C509
1
18p
C511
1
15p
C513
1
33p
C516
4
1k
R101, R102, R403, R614
8
10k
R201, R203, R205, R406, R602, R604, R606, R613
7
5.1k
R202, R204, R401, R402, R607, R609, R611
6
500
R404, R405, R501, R601, R603, R605
3
3k
R608, R610, R612

Flight-Computer design files

The KiCad project lives in the Pioneer-Rocketry/Flight-Computer repository on GitHub; these links point at the commit this page was built from.

Flight-Computer: common questions

What microcontroller does the Flight-Computer use?

The Flight-Computer is built around the STM32F405RGTx, from the STM32 family.

How big is the Flight-Computer PCB?

The Flight-Computer measures 30 × 60 mm, has 6 copper layers and is 1.537 mm thick.

How many components are on the Flight-Computer?

100 components, from 48 distinct parts. The full bill of materials is listed on this page.

Where can I download the Flight-Computer design files?

From the Pioneer-Rocketry/Flight-Computer repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Flight-Computer design in my own project?

The repository has no license, so all rights stay with Pioneer-Rocketry. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Flight-Computer without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards