8 open source boards using the SKY13453-385LF
Real designs built with the SKY13453-385LF, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Flight-Computer
Pioneer-Rocketry
30 × 60 mm100 parts6LNo license2NXP
HackRf-Circuit-Board
GitByKaliMeNope
120 × 75 mm439 parts4LCERN-OHL-P-2.01NXP
${TITLE}
Josephrp
120 × 75 mm340 parts4LCustom license12RP2040/RP2350
Low power
ShaneTWilliams
128.5 × 45 mm183 parts4LNo license3NXP
${TITLE}
greearb
120 × 75 mm340 parts4LGPL-2.01NXP
${TITLE}
JensLiu
120 × 75 mm340 parts4LGPL-2.01NXP
${TITLE}
deepin-community
120 × 75 mm340 parts4LGPL-2.00Raspberry Pi
Ground station
ShaneTWilliams
65 × 59.5 mm117 parts4LNo license3
How designs wire the SKY13453-385LF
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the SKY13453-385LF connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a capacitor to GND on 7 of 7 designs, most often 10 nF (then 100 pF).
- The RF1 pin has a series capacitor on 7 of 7 designs, most often 22 pF (then 1 nF).
- The RF2 pin has a series capacitor on 7 of 7 designs, most often 22 pF (then 1 nF).
- The VCTL pin has a capacitor to GND on 7 of 7 designs, most often 33 pF (then 100 pF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDDpin 1 | Connected to: RFFC5072TR7 71%, MAX2837ETM+T 57%, MAX5864ETM+T 57% · 3.3V 29% |
|
| RF1pin 2 | Connected to: Signal 100% |
|
| GNDpin 3 | Connected to: GND 100% | — |
| RF2pin 4 | Connected to: Signal 100% |
|
| VCTLpin 5 | Connected to: SKY13317-373LF 71%, a connector 71%, the microcontroller 71% |
|
| RFCpin 6 | Connected to: Signal 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ${TITLE} by Josephrp, Ground station by ShaneTWilliams, Flight-Computer by Pioneer-Rocketry and HackRf-Circuit-Board-KiCad by GitByKaliMeNope.
The SKY13453-385LF in open source designs
The gallery holds 8 open source boards using the SKY13453-385LF from 7 GitHub repositories; a typical one measures about 120 × 75 mm and carries around 340 components.
100% use four copper layers or more, and 50% carry an open source license.
The most starred is ${TITLE} by Josephrp.
Parts used alongside the SKY13453-385LF
Microcontrollers on boards using the SKY13453-385LF
What boards using the SKY13453-385LF are built for
SKY13453-385LF: common questions
Where can I find a SKY13453-385LF reference design?
Each of the 8 boards on this page is a real design using the SKY13453-385LF. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the SKY13453-385LF VDD pin connected?
The VDD pin has a capacitor to GND on 7 of 7 designs, most often 10 nF (then 100 pF). Counted from the KiCad layouts of 7 open source designs using the SKY13453-385LF.
How is the SKY13453-385LF RF1 pin connected?
The RF1 pin has a series capacitor on 7 of 7 designs, most often 22 pF (then 1 nF). Counted from the KiCad layouts of 7 open source designs using the SKY13453-385LF.
How is the SKY13453-385LF RF2 pin connected?
The RF2 pin has a series capacitor on 7 of 7 designs, most often 22 pF (then 1 nF). Counted from the KiCad layouts of 7 open source designs using the SKY13453-385LF.
What parts are used alongside the SKY13453-385LF?
The DEA162400HT-8004B1, LP0603A1880ANTR, LPC4320FBD144,551, MGA-81563-TR1G and RFFC5072TR7 appear in the most repositories here.
Which microcontrollers do boards using the SKY13453-385LF use?
Most are built on NXP (5), Raspberry Pi (1), RP2040/RP2350 (1) and STM32 (1).
How big is a typical board using the SKY13453-385LF?
The median is 120 × 75 mm, and 0% are two-layer designs.
What is the most popular open source board using the SKY13453-385LF?
By GitHub stars, ${TITLE} by Josephrp, with 12 stars.
Can I simulate one of these boards using the SKY13453-385LF before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.