5 open source boards using the 74HC4060
Real designs built with the 74HC4060, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
68000
jefftranter
134.6 × 208.3 mm90 parts2LNo license132Z80 IOB
kuninet
100 × 74.9 mm34 parts2LMIT2Lock in amplifier
cLLeB
90 × 60 mm50 parts2LNo license0TICK
jasonsbeer
37.3 × 27 mm10 parts2LGPL-3.01992x2 Minibadge Holder USB-C
Pips801
49 × 49 mm19 parts2LNo license7
How designs wire the 74HC4060
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the 74HC4060 connects to, and the resistors, capacitors and other passives placed on it.
- The Φ0 pins have a series resistor on 5 of 5 designs, most often 10 MΩ (then 8.45 kΩ).
- The Φ1 pin has a series resistor on 5 of 5 designs, most often 10 MΩ (then 100 kΩ).
- The Q12 pin is left unconnected on 5 of 5 designs.
- The Q13 pin is left unconnected on 5 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Q12pin 1 | Connected to: Not connected 100% | — |
| Q13pin 2 | Connected to: Not connected 100% | — |
| Q14pin 3 | Connected to: Not connected 80% · a signal 20% | — |
| Q6pin 4 | Connected to: Not connected 80% · a signal 20% | — |
| Q5pin 5 | Connected to: Not connected 60% · a signal 40% | — |
| Q7pin 6 | Connected to: Not connected 80% · a signal 20% | — |
| Q4pin 7 | Connected to: Not connected 60% · a signal 40% | — |
| VSSpin 8 | Connected to: GND 100% | — |
| Φ0pin 9, 10 | Connected to: Signal 60% · not connected 40% |
|
| Φ1pin 11 | Connected to: Signal 100% |
|
| CLRpin 12 | Connected to: GND 100% | — |
| Q9pin 13 | Connected to: Not connected 80% · a signal 20% | — |
| Q8pin 14 | Connected to: Not connected 80% · a signal 20% | — |
| Q10pin 15 | Connected to: Not connected 80% · a signal 20% | — |
| VDDpin 16 | Connected to: 5V 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include TICK by jasonsbeer, 68000 by jefftranter, 2x2 Minibadge Holder USB-C by Pips801 and Z80 IOB by kuninet.
The 74HC4060 in open source designs
The gallery holds 5 open source boards using the 74HC4060 from 5 GitHub repositories; a typical one measures about 90 × 60 mm and carries around 34 components.
100% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.
The most starred is TICK by jasonsbeer.
What boards using the 74HC4060 are built for
74HC4060: common questions
Where can I find a 74HC4060 reference design?
Each of the 5 boards on this page is a real design using the 74HC4060. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the 74HC4060 Φ0 pin?
The Φ0 pins have a series resistor on 5 of 5 designs, most often 10 MΩ (then 8.45 kΩ). Counted from the KiCad layouts of 5 open source designs using the 74HC4060.
What resistor goes on the 74HC4060 Φ1 pin?
The Φ1 pin has a series resistor on 5 of 5 designs, most often 10 MΩ (then 100 kΩ). Counted from the KiCad layouts of 5 open source designs using the 74HC4060.
How is the 74HC4060 Q12 pin connected?
The Q12 pin is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the 74HC4060.
How big is a typical board using the 74HC4060?
The median is 90 × 60 mm, and 100% are two-layer designs.
What is the most popular open source board using the 74HC4060?
By GitHub stars, TICK by jasonsbeer, with 199 stars.
Can I simulate one of these boards using the 74HC4060 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.