NicE-Buoy

pnn69·NicE-Buoy·PCBA_Robobouoy-V4.0/Robobouoy-V4.0.kicad_pcb

NicE-Buoy PCB layout, top view — open source ESP32 board by pnn69

About the NicE-Buoy PCB

NicE-Buoy is an open source ESP32 PCB design by pnn69, published on GitHub. It is a 4-layer board measuring 194 × 40 mm, with 227 components from 61 distinct parts.

Its main chip is the ESP32-WROOM-32E_(visible_peripherals), from the ESP32 family. Other key parts include the LM1117S-3.3, SN74LV1T34DBV, LMR16020PDDA, INA181A1IDBVR(XBLW) and LP5907MFX-1.8. By type, the board carries 80 resistors, 67 capacitors, 23 diodes, 18 transistors, 14 connectors and 12 ICs.

It belongs with the rf & radio and iot & wireless designs in this gallery.

From the project

This device sails autonome to a given location.

Welcome to the master repository for the NicE-Buoy Autonomous Marine System. This codebase powers a highly reliable, dual-processor autonomous marine buoy designed for GPS lock-to-position, remote configuration, automated sailing, and live telemetry tracking over LoRa and WiFi (UDP).

NicE-Buoy is an industrial-grade marine robotic system consisting of multiple hardware and software components. Each buoy uses a dual-ESP32 architecture split into a Top Unit (RoboTop) and a Sub Unit (RoboSub), connected by a single-wire half-duplex serial link. This physical decoupling isolates high-frequency…

Main components on the NicE-Buoy

LM1117S-3.3ESP32-WROOM-32E_(visible_peripherals)SN74LV1T34DBVLMR16020PDDAINA181A1IDBVR(XBLW)LP5907MFX-1.8ICM-20948Ai-Thinker-Ra-02

NicE-Buoy bill of materials (BOM)

227 components, 61 distinct parts.

QtyPartRefs
2
LM1117S-3.3
U201, U601
2
ESP32-WROOM-32E_(visible_peripherals)
U202, U501
2
SN74LV1T34DBV
U301, U302
2
LMR16020PDDA
U303, U602
1
INA181A1IDBVR(XBLW)
U305
1
LP5907MFX-1.8
U401
1
ICM-20948
U402
1
Ai-Thinker-Ra-02
U502
9
AO3400A
Q201, Q304, Q305, Q310, Q401, Q402, Q501, Q502 +1
2
MMBT3904
hongjiacheng
Q301, Q605
3
AO3401A
Q302, Q311, Q604
2
MMBT5401
hongjiacheng
Q303, Q602
2
AON6407-MS
Q307, Q308
2
Prog
J201, J501
2
COMPASS
J202, J401
1
CHRG/DATA
J301
1
ESC_BB
J302
1
ESC_SB
J303
1
ESC_PWR_BB
J304
1
ESC_PWR_SB
J305
Show 41 more
QtyPartRefs
1
LiPo S6
J306
1
LIGHT/BUTTON
J502
1
GPS
J503
1
LEDSTRIP
J504
1
CHRG/DATA
J601
2
Cy-12085G-3016-P4
CY-12085G-3016-P4
CY(超音)
BUZZER201, BUZZER501
1
~
PN101
2
On/Off
SW301, SW601
1
RX_SUB
TP309
1
TX_SUB
TP310
1
COM
TP311
2
GND
TP313, TP606
1
EXT LED
TP505
5
GREEN
D201, D304, D305, D309, D605
6
WS2812B
D202, D203, D204, D502, D503, D504
8
1N4148WS
D205, D306, D307, D311, D501, D601, D603, D606
1
RED
D302
2
SS54
D308, D604
1
COM_TOP
D602
2
10uH
L301, L601
32
100n
C201, C202, C204, C207, C208, C210, C211, C212 +24
10
100u/6.3V
C203, C209, C312, C502, C503, C511, C512, C607 +2
4
10n
C205, C213, C308, C606
10
1n
C206, C303, C311, C319, C510, C514, C515, C516 +2
2
22uF/35V
C301, C601
2
100n
C403, C404
5
10u/25V
C405, C406, C603, C610, C611
1
1n
C407
1
10n
C409
16
10K
R201, R208, R209, R307, R321, R322, R335, R344 +8
6
2.2K
R202, R205, R206, R306, R309, R604
11
100
R203, R207, R301, R302, R331, R504, R505, R506 +3
2
4.7k
R304, R305
14
1K
R308, R310, R313, R314, R327, R340, R342, R602 +6
11
100K
R311, R312, R315, R316, R317, R318, R336, R603 +3
2
5mOhm
R319, R325
6
47K
R320, R326, R328, R608, R611, R615
2
18k
R323, R324
2
8.2K
R329, R616
2
6.2k
R341, R618
6
10k
R401, R402, R403, R404, R405, R406

NicE-Buoy design files

The KiCad project lives in the pnn69/NicE-Buoy repository on GitHub; these links point at the commit this page was built from.

NicE-Buoy: common questions

What microcontroller does the NicE-Buoy use?

The NicE-Buoy is built around the ESP32-WROOM-32E_(visible_peripherals), from the ESP32 family.

How big is the NicE-Buoy PCB?

The NicE-Buoy measures 194 × 40 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the NicE-Buoy?

227 components, from 61 distinct parts. The full bill of materials is listed on this page.

Where can I download the NicE-Buoy design files?

From the pnn69/NicE-Buoy repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the NicE-Buoy design in my own project?

The repository has no license, so all rights stay with pnn69. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the NicE-Buoy without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards